Download Print this page
CaryMart S2U-DC06-ANT3 Manual

CaryMart S2U-DC06-ANT3 Manual

Rf wireless remote control kit

Advertisement

Quick Links

RF Wireless Remote Control Kit (Model 0020138)
Package Include:
1 x Receiver: S2U-DC06-ANT3 / S2U-DC09-ANT3 / S2U-DC12-ANT3 / S2U-DC24-ANT3
1 x Transmitter: XA-2L
1 x User manual
Feature:
Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship,
offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks,
motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.
Wireless control, easy to install.
Power Supply: Four working voltage versions, DC 6V, 9V, 12V, 24V.
Relay Output: This receiver is relay output, it can be used to operate both DC and AC equipments. The terminals are NO / NC (normally open /
normally closed), which serves as a switch. That means you should also connect a separate power supply to equipments.
Each channel can work at maximum current 10A, such as 120W/12V, 60W/6V, 90W/9V, 240W/24V, 1100W/110V, 2200W/220V.
With external telescopic antenna, the receiver have a farther working range.
You can control the equipments by using the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With reverse power protection and over current protection.
Reliable control: The code has thousands of different combinations, and the receiver only works with the transmitter which use the same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No.: S2U-DC06 / S2U-DC09 / S2U-DC12 / S2U-DC24
Power Supply (Operating Voltage): DC6V (S2U-DC06), DC12V±1V (S2U-DC12), DC9V±1V (S2U-DC09), DC24V±2V (S2U-DC24)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Wire range for the terminals: 22-14 AWG
Working Frequency: 433.92MHz
Channel: 2 CH
Control Modes: Self-locking, Momentary, Interlocking, Momentary + Self-locking
Static Current: ≤6mA
Maximum Working Current: 10A / each channel
PCB size: 67mm x 50mm x 18mm
Case size: 75mm x 54mm x 27mm
Transmitter Parameters:
Model No.: 0021040 (XA-2L)
With Sliding Cover: Slide up when it doesn't work (to protect the button). Slide down the button will appear.
Shell Color: Black
Channel/Button: 2
Button Symbol: A, B
Operating Voltage: 12V (1 x 27A -12V battery, can be used for 12 months)
Operating Current: 4mA
Operating Frequency: 433.92Mhz
Encoding Chip: EV1527
Encoding Type: Learning code (up to 1 million codes, reducing code collision and unauthorized code scanning possibilities.)
Transmitting Distance: 50m / 150ft (theoretically)
The distance of 50m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be
hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or may
not reach 50m.
Modulation Mode: ASK
Operating Temperature: -20°C to +70°C
Unit Size: 55mm x 32mm x 15mm
Weight: 30g
Uses: garage doors, motorcycles, car alarm products, home security products, wireless remote control products, industrial control products.
Matching Transmitters:
The receiver can work with different transmitters, such as model C-2/C-3 (100M), CWB-2/CWB-3 (50M, waterproof), or CB-2/CB-3-2 (1000M) etc.
When you set the receiver in Self-locking or Momentary mode, it should work with two buttons transmitter, such as model C-2 (100M), CWB-2 (50M,
waterproof), or CB-2 (1000M) etc. When you set the receiver in Interlocking mode, it should work with three buttons transmitter, such as model C-3
(100M), CWB-3 (50M, waterproof), or CB-3-2 (1000M) etc.
Working Range:
With a transmitter (such as XA-2L) to form a complete set, the maximum working distance can reach 50M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will
be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this
SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD
http://www.carymart.com
E-Mail: sale@carymart.com

Advertisement

loading

Summary of Contents for CaryMart S2U-DC06-ANT3

  • Page 1 RF Wireless Remote Control Kit (Model 0020138) Package Include: 1 x Receiver: S2U-DC06-ANT3 / S2U-DC09-ANT3 / S2U-DC12-ANT3 / S2U-DC24-ANT3 1 x Transmitter: XA-2L 1 x User manual Feature: Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call, etc.
  • Page 2 Operation: Press and hold the learning button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored codes have been deleted successfully. SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD http://www.carymart.com E-Mail: sale@carymart.com...
  • Page 3 Lamp 2 Lamp 1 Lamp 2 Lamp 1 DC Power supply DC Power supply DC Power supply AC Power supply A, B=Normally Closed; B, C=Normally Open. A, B=Normally Closed; B, C=Normally Open. SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD http://www.carymart.com E-Mail: sale@carymart.com...
  • Page 4 Relay 2 Relay 1 Relay 2 AC Motor Motor DC Power supply DC Power supply DC Power supply AC Power supply A, B=Normally Closed; B, C=Normally Open. A, B=Normally Closed; B, C=Normally Open. SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD http://www.carymart.com E-Mail: sale@carymart.com...

This manual is also suitable for:

S2u-dc09-ant3S2u-dc12-ant3S2u-dc24-ant3Xa-2l0020138