Eco Settings - Philips 7202 Series User Manual

2 - When you're done, select OK and press OK.
Step 4 - Configure Bulb
In the following step, you will configure each Philips
Hue bulb.
To configure each Hue bulb...
1 - Select a bulb to configure and press OK. The
bulb you selected is flashing.
2 - Select Start and press OK.
3 - First indicate where you placed the bulb relative
to the TV. A correct setting of the Angle will send the
correct Ambilight colour to the bulb. Select the slider
bar to adjust the position.
4 - Secondly, indicate the Distance between the
bulb and the TV. The further away from the TV, the
weaker the Ambilight colour. Select the slider bar to
adjust the distance.
5 - Finally, set the Brightness of the bulb. Select
the slider bar to adjust the brightness.
6 - To stop configuring this bulb, select OK and
press OK.
7 - In the Configure Ambilight+hue menu, you can
do the same for each bulb.
8 - When all Ambilight+hue bulbs are configured,
select Finish and press OK.
Ambilight+hue is ready for use.
Switch Off
To switch off Ambilight+hue...
1 - Press , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue.
4 - Select Off or On.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Immersion
With Immersion, you can adjust how accurate the
Hue bulbs follow the Ambilight.
To adjust Ambilight+hue immersion...
1 - Press , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > Immersion.
4 - Press the arrows  (up) or  (down) to adjust
the value.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Lounge Light+hue
If you installed Ambilight+hue, you can let the hue
bulbs follow Lounge Light from Ambilight. The Philips
hue lamps will expand the Lounge Light effect across
the room. The hue bulbs are switched on and
automatically set to follow Lounge Light when you
configure Ambilight+hue. If you do not want the hue
bulbs to follow Lounge Light, you can switch the
bulbs off.
To switch the hue bulbs off...
1 - Press , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > Lounge Light+hue.
4 - Select Off.
5 - Press  (left) repeatedly if necessary, to close
the menu.
View Configuration
With View Configuration, you can view current setup
of the Ambilight+hue, network, the Bridge and bulbs.
To view Ambilight+hue configuration...
1 - Press , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > View Configuration.
4 - Press  (left) repeatedly if necessary, to close
the menu.
Reset Configuration
To reset Ambilight+hue...
1 - Press , select All Settings and press OK.
2 - Select Ambilight and press  (right) to enter
the menu.
3 - Select Ambilight+hue > Reset Configuration.
The configuration is reset.
4 - Press  (left) repeatedly if necessary, to close
the menu
12.5

Eco Settings

Energy Saving
Eco settings  bundles the settings that help the
environment.
Energy Saving
If you select Energy Saving, the TV switches to Picture
Style - Standard automatically, the most ideal energy
conscious setting for the picture.
57