Advertisement
INSTALLATION, OPERATION & MAINTENANCE MANUAL WHD-BSN
WASTE ASSEMBLY
HINT: Teflon tape is recommended on all threaded waste and
supply connections.
4
Assemble waste piping using teflon tape on all threaded
connections and make up waste connections to 1-1/2" P-trap.
5
WHITEHALL MANUFACTURING • P.O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
STRAINER
FLANGE
1
2
3
5
4
NOTE: Waste Assembly may require field cutting and fitting by the
installer.
Phone (800) 782-7706 • Web: www.whitehallmfg.com
3
Install strainer to Basin using plumbers putty
on underside of grid strainer flange. From
beneath basin, assemble gasket, washer and
jam nut as shown to strainer and tighten
securely. Add close elbow to strainer assembly
as indicated.
1
Strainer w/ 1-1/2" -16 UNE Threads
2
Rubber Gasket
3
Flat Fiber Washer
4
1-1/2"-16 x 1-1/4" UNI Close Ell with 3/8"
NPT Clean-Out Plug
5
1-1/2" OD Waste Outlet Connection
NOTE: Waste Assembly may be provided with
Extra items not required in this assembly.
TOP VIEW
3"
[77]
2"
[51]
Advertisement
