Installing And Removing The Battery - Nikon E2 Instruction Manual

Installing and removing the battery
Use the Rechargeable Battery Pack EN-1 . The battery pack
was not charged when shipped from the factory. You must
charge the battery fu ll y before install ing it fo r th e first time. (See
page 83.)
- Never touch the battery pack 's metal port with another metal object.
-Be sure to set the Main dial to L when installing and removing the battery
pack.
- See page 83 for handling batteries.
1
Fully recharging the battery pack
Use dedicated Quick Charger EH-1 (EH-2) .
A full recharge takes approx . 60 minutes .
2
Installing the battery pack
Install the ful ly charged battery pack (EN-1)
into the battery chamber at the bottom of
the camera and push it down until it locks
into place .
Removing the battery pack
Turn the battery eject lever in the direction
of the arrow ; the battery pack then pops out
and can be removed.
21