Stealth Cam STC- ZX36NG Instruction Manual page 17

o
SECURITY KEY CONFIGURATION – 0000 (default): To change the key to an owner operated
one press the ENTER button. With this option blinking, use the UP or DOWN arrow buttons
change the first digit to the preferred number or letter. Then using the LEFT button, move to
the second digit and change it to the preferred number or letter as well. Continue this until
all 4 digits are correctly set. Finally press the ENTER button to secure the new code.
NOTE: The camera owner is responsible for remembering the code. Should the code be
forgotten the owner must call in to Customer Service (877-­‐269-­‐8490) for directions on
getting the unit restored to factory default. In order for the owner to be authorized for the
reset, this camera must be registered with Stealth Cam.
!
FORMAT CARD – NO (default): This setting is used to format the SD memory card installed.
With this option blinking, pressing the UP or DOWN arrow buttons will cause the camera to
cycle between the two options of NO or YES. When the YES option is chosen and the ENTER
button is press the camera will format the card, deleting any previous information that was
on the card. Pressing the DOWN arrow key will move the display back to the starting option
of SETUP DATE. (See page 21 for more details.)
www.stealthcam.com
877-­‐269-­‐8490
CAMERA PROGRAMMING -­‐ CUSTOM (CONT)
Page
17