Adjustment Of The Timing Between Hook And Needle Motion - JUKI PLK-J6040R3 Technical Manual

6-2-2. Adjustment of the timing between the hook and the needle motion
The timing between hook and needle motion can be adjusted by operation panel. Please refer to the
OPERATION PANEL technical manual if needed.
(1) Remove the all of any parts, tools and screws on the sliding table. After make sure the work environment
safety, Turn the power switch on. At this time, do not press the home position return icon
NOTE From the first home position returning after turn on the power switch, the hook and needle timing
information is stored. This timing information cannot be overwritten when the power switch turned on. In
this reason, please operate this adjustment before press the home position return icon.
(2) Press the
(3) Input the pass word, and press the
NOTE If press the home position return icon, the
cannot display the next setting screen.
(4) Press the main motor up position setting icon.
icon from the function mode.
icon.
icon is displayed with shading
- 19 -
.
and