Unloading Film - Nikon EL2 Instruction Manual

UNLOADING FILM
When the frame counter indicates the last exposure has
been made, or when the film-advance lever can no long-
er be stroked, the roll of film has been fully exposed
and it should be removed from the camera.
To unload the camera, first press the rewind button on
the camera baseplate; then, unfold the rewind crank
and turn it in the direction of the engraved arrow,
using a smooth, even pressure. When no more tension is
felt, the film leader has left the take-up spool and the
camera back may be opened as explained previously.
After opening the camera back, carefully lift the film
cartridge free of the film chamber. Note that as the film-
advance lever is stroked for the next exposure, the re-
wind button will be released to engage the film-advance
mechanism.
Caution: Be careful not to push the rewind b u t t o n during film-
advance operation, as temporary f i l m stoppage and double ex-
posure may occur. Also, do not attempt to force the advance
lever at the completion of the roll, as this can result in tearing
the film out of the cartridge.