Pentair HYPRO HM1C Product Bulletin page 24

Repair Parts Kit No. 3430-0445
Contains: One o-ring (Ref. 13),
one rubber gasket (Ref. 11), one mechanical
seal (Ref. 12), one gasket (Ref. 8) and one
washer (Ref. 9).
Ref. Qty.
No. Req'd. Part No.
1 4 2210-0087 Hex Head Cap Screw
2 2 2210-0016 Hex Head Cap Screw (Base Only)
3 6 2270-0041 Washer
4 4 2406-0020 Pipe Plug
5 1 0700-9000P Pump Casing
6 1 2250-0052 Impeller Nut
7 1 2250-0051 Jam Nut
8 1 1700-0097 Gasket (Viton)
9 1 2270-0057 Washer
10 1 0402-9100P Impeller
11 1 1700-0100 Rubber Gasket
12 1 2120-0009 Mechanical Seal (Viton/Ceramic) (Std 9303P)
12 1 3430-0593 Mechanical Seal (Silicon Carbide) (Optional)
13 1 1721-0083 O-ring
14 1 0750-9300P Cover
15 1 2210-0088 Screw
16 1 0750-9006C Intermediate Flange
17 1 1510-0063 Base Plate
18 2 2250-0008 Hex Nut
19 1 1410-0056 Slinger Ring
20 1 1810-0014 Snap Ring
21 1 1820-0013 Retaining Ring
22 1 2000-0010 Ball Bearing
23 1 1410-0131 Cartridge, Front
24 2 1720-0268 O-ring
25 1 2104-0010 Lip Seal
26 1 1410-0130 Seal Spacer
27 1 2029-0014 Thrust Bearing Assembly
28 1 1610-0042 Woodruff Key (9303P all except HM3C)
28A 1 1610-0053 Square Key (9303P-HM3C Only)
29 1 0534-2500 Shaft (HM2C/HM4C)
29 1 0535-2500 Shaft (HM1C/HM5C)
29 1 0537-2500 Shaft (HM3C)
30 1 1810-0026 Snap Ring
31 1 1610-0032 Roll Pin (HM2C / HM4C)
All 9300 Polypropylene Series Pumps
Silicon Seal Parts Kit # 3430-0593
Contains one each:
mechanical seal (Ref. 12) and o-ring (Ref. 13).
Description
-23-
Adapter Kit No. 3430-0187
(HM2 and HM4 Models Only):
Contains one each:
No. 3360-0021 Pressure Port Adapter
No. 3373-0020 (Size #1)
No. 3373-0021 (Size #2)
No. 3373-0022 (Size #3)
No. 1720-0108 Adapter O-ring and
No. 1720-0105 Orifice O-ring (Qty. 3).
Ref. Qty.
No. Req'd. Part No.
31 1 1610-0031 Roll Pin (HM1C / HM5C)
31 1 1610-0055 Roll Pin (HM3C)
32 1 0150-2500C Motor Body (includes needle bearing)
33 4 2210-0021 Hex Head Cap Screw
34 2 1720-0110 O-ring
35 1 1600-0045 Dowel Pin (HM2C / HM4C)
35 1 1600-0044 Dowel Pin (HM1C/HM5C)
35 1 1600-0052 Dowel Pin (HM3C)
36 1 1600-0042 Dowel Pin (HM2C/ HM4C)
36 1 1600-0037 Dowel Pin (HM1C/HM5C)
36 1 1600-0068 Dowel Pin (HM3C)
37 1 3900-0022 Gerotor (HM1C)
37 1 3900-0023 Gerotor (HM2C)
37 1 3900-0024 Gerotor (HM3C)
37 1 3900-0025 Gerotor (HM4C)
37 1 3900-0048 Gerotor (HM5C)
38 1 0701-2500C1 Gerotor Housing (HM2C Models) 1/4" wide
38 1 0700-2500C1 Gerotor Housing (HM1C Models) 1/2" wide
38 1 0703-2500C1 Gerotor Housing (HM4C Models) 5/16" wide
38 1 0702-2500C1 Gerotor Housing (HM3C Models) 1" wide
38 1 0704-2500C1 Gerotor Housing (HM5C Models) 5/8" wide
39 1 0254-2500C2 Motor End Plate (includes needle bearing)
40 4 2270-0039 Washer
41 4 2220-0045 Cap Screw (HM2C / HM4C Models)
41 4 2220-0021 Cap Screw (HM1C Models)
41 4 2220-0044 Cap Screw (HM3C Models)
41 4 2220-0032 Cap Screw (HM5C Models)
42 1 1720-0108 O-ring
43 1 3360-0021A Pressure Port Adapter (includes o-ring)
44 1 3320-0051A Tank Port Adapter (includes o-ring)
45 1 1720-0262 O-ring
46 1 3220-0029 Bypass Adjusting Screw
47 1 1700-0047 Gasket
48 1 2270-0027 Washer
49 1 2250-0038 Lock Nut
NOTE: When ordering parts, give
QUANTITY, PART NUMBER,
DESCRIPTION, and COMPLETE
MODEL NUMBER. Reference
numbers are used ONLY to identify
parts in the drawing and are NOT to
be used as order numbers.
Parts Kit No. 3430-0748
Contains: One each ball bearing
(Ref. 22), motor shaft seal (Ref.
25), thread seal gasket (Ref. 47),
two cartridge o-rings (Ref. 24)
and washer (Ref. 48); two each
motor housing o-rings (Ref. 34),
and port adapter o-rings
(Ref. 42 & 45).
Hydraulic Motor Part Nos.
2500-0181C (HM1C Models)
2500-0182C (HM2C Models)
2500-0183C (HM3C Models)
2500-0184C (HM4C Models)
2500-0185C (HM5C Models)
Description