Bluetti PV68 - Solar Panel Manual

What is in the box

How to use

1. Unfold
   
2. Adjust the kickstand
   
3. Connect to power station
   

Note:
Use ONLY ONE PV68 solar panel with EB3A/EB55.
Whether connected in series or parallel, make sure the total voltage of solar panels is under the power station's input voltage limit.

Attention

Regular inspection and maintenance are required to prolong the lifespan of solar panels.

No fall

No soak

No bend

No shading

No scratch

Do not use solar panels in extreme weather conditions like thunderstorms, floods, typhoons, etc.
Always use solar panels within the specified temperature range (14-149° F/-10-65° C)

Technical details

Frequently asked questions

Is the solar panel waterproof?
No. The solar panel is IP65 water-resistant that provides protection against water splash. Please do not leave 'it in the rain or water for a long time.

What will affect the final conversion efficiency of solar panels?
The actual solar panel efficiency may be affected by several factors, like weather, weather, sun intensity, shading, panel orientation, temperature, location, and dust and dirt. For example, if you live in a place without much sunlight or your panels are covered by shade, you'll get a very low output or none at all.

Is the BLUETTI's solar panel compatible with the third party s power station?
Yes. Make sure BLUETTI solar panels' voltage is compatible with your power stations' voltage limit, while you're using the same connector. Please feel free 'to contact us for compatibility with other power stations.