Playing With Different Tones (Digital Filter) - Sony DS-JA555ES Operating Instructions Manual

Playing M Ds
Playing Wit h Different Tones
(Digit al Filt er)
This deck is equipped with the V.C. (Variable
Coefficient) filters to allow you to adjust the tone to
match your audio system, listening environment, and
the source being played. Note that the digital filters are
effective only on the analog signals output from the
LINE(ANALOG) OUT jacks and the PHONES jack.
1
Press FILTER.
The currently selected filter appears in the display.
2
Press FILTER repeatedly to select the filter you
want.
Select
FILTER-STD
(factory setting)
FILTER-1
FILTER-2
FILTER-3
The FILTER button lights green when a setting
other than "FILTER-STD" is selected in DF (digital
filter) display.
z
You can use the remote to select the filter Z
Press FILTER repeatedly until the filter you want
appears in the display.
34 GB
Downloaded from: https://www.usersmanualguide.com/
FILTER
To produce
An expansive sound of wide range.
A sound that is clearly positioned and
smooth.
A fresh and powerful sound.
A resonant and mellow sound.
z
What is a V.C. (Variable Coefficient) filter?
A variable coefficient filter changes the sound
characteristics of a signal by applying specific frequency
cut-off conditions. Such filters are provided on digital
devices such as CD players and MD decks to remove
aliasing noise.
Note
The change in sound characteristics caused by digital filters
occur mainly in the inaudible range, not the audible range as
in the case of an amplifier.
0 )
§ ( P p r