IMPORTANT PLEASE READ All products manufactured and supplied by AQUAECO are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation.
Page 4
Instruction Manual 1. Open the outer frame and remove the soap tank and mechanism assembly which is snap fitted inside. 2. Mark the position for the holes. 3. Drill the holes & insert the screw anchors. 4. Place the SD again on place matching with the holes and fix it with three screws and washers.
Page 5
5. Re mount the mechanism assembly and soap tank. 6. Close the outer frame and lock it with the key. ABRASIVE...