Electronic Vr - Nikon COOLPIX S3000 User Manual

Setup Menu
w Electronic VR
d button M z (Setup menu) (A 126) M w Electronic VR
Choose whether or not electronic VR (vibration reduction) is used when taking still
pictures.
w Auto
Electronic VR is enabled and the effects of camera shake are reduced with shooting
of still pictures when all of the following conditions are met.
• The flash is turned off or set to slow sync mode.
• A slow shutter speed is used.
• The Continuous setting is set to Single
• The subject is dark.
Off (default setting)
Electronic VR is disabled.
When Auto is selected, R is displayed in the monitor (A 6), and electronic VR is
applied according to shooting conditions.
B
Notes on Electronic Vibration Reduction
• Electronic VR does not function when the flash is used, except when slow sync mode is applied.
Electronic VR does not function when slow sync with red-eye reduction (A 54, 55) is used.
• Electronic VR does not function with exposures that exceed a certain length of time.
• Electronic VR is activated only when ISO sensitivity (A 42) is set to Auto.
• Electronic VR does not function when Blink proof (A 64) is set to On in smart portrait mode.
• Electronic VR does not function in the following scene mode:
- Sports (A 54)
- Night portrait (A 54)
- Dusk/dawn (A 55)
- Night landscape (A 56)
- Museum (A 57)
- Fireworks show (A 58)
- Backlight (A 58)
• The effectiveness of electronic VR decreases as camera shake increases.
• The picture taken using electronic VR may be somewhat "grainy" in appearance.
D
Electronic VR for Movies
To compensate for camera shake with movie recording, enable Electronic VR (A 109) from the
movie menu (A 108).
134