Related Manuals for NoiseKen ADAPTOR
Summary of Contents for NoiseKen ADAPTOR
- Page 1 INSTRUCTION MANUAL MAGNETIC FIELD LOOP ADAPTOR 03-00070A MODEL NOISE LABORATORY CO., LTD. Edition 1.02 AEC00277-00E-0C...
- Page 2 NOTICE The contents of this booklet are subject to change without prior notice. No part of this booklet may be reproduced or transferred, in any form, for any purpose, without the permission of Noise Laboratory Co., Ltd. The contents of this booklet have been thoroughly checked. However, if a doubtful point, an error in writing or a missing is found, please contact us.
-
Page 3: Important Safety Precautions
1. Important Safety Precautions Important points for the safe use of this unit are provided below. Be sure to carefully read this information before use. 1. Do not use this unit in areas where open flames are prohibited or areas having an explosive atmosphere. - Page 4 Memorandum...
-
Page 5: Application Form For Instruction Manual
2. Application Form For Instruction Manual We place an order for an instruction manual. Model: 03-00070A Serial No.: Applicant: Company name: Address: Department: Person in charge: Tel No.: Fax No.: line Cut off this page "application form for instruction manual" from this volume and keep it for future use with care. - Page 6 Memorandum...
-
Page 7: Table Of Contents
3. Table of contents IMPORTANT SAFETY PRECAUTIONS ....................1 APPLICATION FORM FOR INSTRUCTION MANUAL ................3 TABLE OF CONTENTS ..........................5 PREFACE ..............................6 BASIC SAFETY PRECAUTIONS ......................7 5－1..................7 ARNING SYMBOLS AND THEIR MEANING 5－2.................... 7 UNDAMENTAL AFETY RECAUTIONS... -
Page 8: Preface
Keep this Instruction Manual in a readily accessible place. Features The MAGNETIC FIELD LOOP ADAPTOR is a one-turn loop coil for magnetic field generation that is used with the discharge gun for the electrostatic discharge simulator. -
Page 9: Basic Safety Precautions
5. Basic Safety Precautions 5－1. Warning symbols and their meaning warning Means a WARNING 警告 If such a danger is not avoided, a potential danger which may result in a death or serious injury will be caused. Caution CAUTION 注意 Means a If such a danger is not avoided, a potential danger which may result in a minor or... - Page 10 5.Basic Safety Precautions CAUTION 注意 8. 8. 8. 8. Place this unit in a steady place to avoid an accident such as fall. 【 【 【 【 Precautions for human body and environments】 】 】 】 9. 9. 9. 9. Avoid giving a strong shock to this unit. Do not put a heavy item on this unit. Do not block the ventilation.
-
Page 11: Package Components
6. Package components The product package includes the following items. Check that all items are present. ● Magnetic field loop adaptor 68 mm 335 mm 170 mm ● Spacer ● SG screw ● Instruction manual (this book) -
Page 12: Specifications
8. Connection to equipment 1. Remove the discharge cup of GT-30R. 2. Mount the attachment cup of the magnetic field loop adaptor by turning it clockwise. 3. Uncover the ground terminal for optional use on the discharge gun by hand. -
Page 13: Operation
9. Operation For the constants of the CR unit for the discharge gun, select the appropriate values from our options. For reference, the Ford standard sets forth 330 pF and 2 kΩ as CR constants for the discharge gun. Set the electrostatic discharge simulator into contact discharge mode. Apply a magnetic field while keeping the loop section a certain distance from the EUT. -
Page 14: Mechanism Of Magnetic Field Generation/Reference Data
The output waveform from the magnetic field loop adaptor 03-00070A is shown below. A receiving probe (magnetic field loop coil with an electric field shield) (01-00049A) is placed parallel to and 10 cm away from the magnetic field loop adaptor. The voltage at the 50 Ω terminal of the probe is measured. - Page 15 A receiving probe (magnetic field loop coil with an electric field shield) (01-00049A) is placed parallel to and 10 cm away from the magnetic field loop adaptor to measure the spectrum using a spectrum analyzer. The measured spectrum is shown below. The electrostatic discharge simulator is set into contact discharge mode, and the output voltage is +1 kV.
-
Page 16: Warranty
11. Warranty Servicing terms The following terms are applicable to servicing by Noise Laboratory Co., Ltd., (hereafter referred to as the Company) provided to maintain the intended performance of its products. 1. Scope The following terms shall apply only to products made by the Company. 2. - Page 17 11.Warranty Limited warranty Noise Laboratory Co., Ltd. (hereafter referred to as the Company) warrants its products to be free from defects in materials and workmanship under normal use and service for a period of one year from date of delivery. In the event of failure of a product covered by this warranty, the Company will repair the product or may, at its option, replace it in lieu of repair without charge.
-
Page 18: Maintenance
12. Maintenance When repair, maintenance or internal adjustment of the unit is required, a qualified service engineer takes charge of such work. Maintenance on the user side is restricted to the outside cleaning and functional check of the unit. When checking or replacing the fuse, turn off the switch of the unit and disconnect the plug socket beforehand. -
Page 19: Noise Laboratory Support Network
13. Noise Laboratory Support Network If a symptom that seems a trouble is found, check the symptom against the following check sheet and inform the model name and serial Number of the product together with the symptom to Noise Laboratory or our nearest sales agent in your area. When the product is returned to Noise Laboratory, write the state of the trouble, contents of your request, model name and serial number in a repair order, pack the product and repair order sheet in the former package or equivalent suitable for transit, and send them back. - Page 20 NOISE LABORATORY CO., LTD. 1-4-4, Chiyoda, Chuo-ku, Sagamihara City, Kanagawa Pref., 252-0237, Japan TEL: +81-(0)42-712-2051 FAX: +81-(0)42-712-2050 URL: http://www.noiseken.com Printed in Japan...