Table of Contents
Advertisement
4W3 4-WAY VALVE AIR CONTROL
General Warning
READ ENTIRE MANUAL CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THE
PECO Equipment. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION
AND ADDITIONAL INSTRUCTIONS INCLUDED WITH THIS EQUIPMENT.
FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
Product Description & Specification
System Description:
The 4W3 4-Way Valve Control is designed to control air flow to Wrap Arm cylinders in the
wash tunnel. This is accomplished using an integrated air regulator, filter, pressure gauge and
a 4-way solenoid valve. Each 4W3 Valve assembly controls 1 Wrap Arm. Two of these units
are required to control a driver side and passenger side Wrap.
System Technical Data: 4W3
Construction: Stainless Steel Mounting Brackets
Width: 6"
Length: 19"
Depth: 6"
Air Requirement: ½" line @ 40 psi. (0.3 Mpa)
Electrical: 120VAC (5 watts per Solenoid)
Shipping Weight: 10 lbs. (5 kg)
028084b 4W3
PECO Corporation – 244 Rex Boulevard – Auburn Hills – Michigan – 48326 – USA – 1-248-299-5800
Page 2 of 10
06/22/23 S:\Engineering Doc's\Manuals & Packing Lists Combined\CONTROL VALVE STATIONS\028084bML 4W3 Update.doc
Advertisement
Table of Contents
