Autoexposure Bracketing - Nikon COOLPIX 8800 Manual

Autoexposure Bracketing

When Auto bracketing is selected, exposure varies
with each shot; the number of shots and amount of
exposure compensation performed are selected from
the sub-menu shown at right. Values are added to
the exposure compensation value selected with the
button ( 44). Bracketing is performed by varying
shutter speed (modes A and M), aperture (mode S), or
shutter speed and aperture (mode P).
Option Number of shots
3, ±0.3
3, ±0.7
3, ±1.0
5, ±0.3
5, ±0.7
5, ±1.0
Continuous Shooting (Autoexposure Bracketing)
At settings of Continuous H and Continuous L (
bracketing cycle is complete. When Single is selected, shutter-release button must be
pressed once for each shot in bracketing cycle.
Auto Flash and Auto ISO (Autoexposure Bracketing)
In auto fl ash mode (
applies to the remaining pictures. If the fl ash fi res on the fi rst shot, it will fi re for the re-
maining shots; if the fl ash does not fi re on the fi rst shot, it will not fi re for the remaining
shots. If sensitivity (ISO equivalency) is set to AUTO (
value for the fi rst shot in each bracketing cycle will also apply to the remaining pictures
(in mode P, sensitivity will vary with each shot).
108
Exposure increment
3
3
3
5
5
5
37), the fl ash setting for the fi rst shot in each bracketing cycle
1
/
± EV
3
2
/
± EV
3
±1 EV
1
/
± EV 0, +0.7, +0.3, –0.3, –0.7
3
2
/
± EV 0, +1.3, +0.7, –0.7, –1.3
3
±1 EV 0, +2.0, +1.0, –1.0, –2.0
88), shooting will pause after each
52) in mode S or A, the sensitivity
AUTO BRACKETING
3 ±0.3
3 ±0.7
3 ±1.0
5 ±0.3
5 ±0.7
5 ±1.0
Bracketing order
0, +0.3, –0.3
0, +0.7, –0.7
0, +1.0, –1.0