Table of Contents
Advertisement
EN 16
5.
How to Navigate
When you press the "MENU" button on the RC transmitter, the
set will toggle between the SDM and the normal user menu
(with the SDM mode still active in the background).
How to Exit SDM
Use one of the following methods:
•
Switch the set to STAND-BY via the RC-transmitter.
•
Via a standard customer RC-transmitter: key in "00"-
sequence.
5.2.2
Service Alignment Mode (SAM)
Purpose
•
To perform (software) alignments.
•
To change option settings.
•
To easily identify the used software version.
•
To view operation hours.
•
To display (or clear) the error code buffer.
How to Activate SAM
Via a standard RC transmitter: key in the code "062596"
directly followed by the "INFO" button. After activating SAM
with this method a service warning will appear on the screen,
you can continue by pressing the red button on the RC.
EBJ1.0U
Service Modes, Error Codes, and Fault Finding
Advertisement
Table of Contents
