Goal Zero Nomad 50 - Solar Panel Manual

GET TO KNOW YOUR GEAR

HOW TO CONNECT

Connect a Nomad 50 Solar Panel to a Goal Zero Yeti Portable Power Station or Sherpa Power Bank by inserting the 8mm blue-ringed connector into the 8mm input on the units. You can also charge USB devices by plugging into the built-in USB port.

HOW IT WORKS

HOW TO CHAIN

The safest and easiest way to chain Nomad 50 Solar Panels is by using an 8mm to APP Combiner Cable. This plug-and-play method ensures you safely chain solar panels for recharging Goal Zero Yeti Portable Power Stations.

NOTE: Do not plug more than two chained Nomad 50 Solar Panels into anything smaller than the Goal Zero Yeti 1000 as this will exceed their input ratings.

OPTIONAL CABLES

Goal Zero's 8mm Extension Cables provide greater distance between your solar panels and your power stations. Purchase these from GoalZero.com.

Nomad 50 Solar Panel
Charges the following:	Approx. Charge time:
Goal Zero Sherpa 100 AC	4-8 hrs
Goal Zero Yeti 200X Lithium	8-16 hrs
Goal Zero Yeti 500X Lithium	16-32 hrs
Solar Panel
Rated Power	50W
Open Circuit Voltage Voc	18-22V
Cell Type	Monocrystalline
Ports
Solar Port (blue, 8mm, male)	14-22V, up to 3.3A (50W max)
USB port	5V, up to 2.4A (12W max)
General
Weight	6.85 lbs (3.1 kg)
Dimensions (unfolded)	17 x 53 x 1.5 in (43.2 x 134.6 x 3.8 cm)
Dimensions (folded)	17 x 11.25 x 2.5 in (43.2 x 28.6 x 6.4 cm)
Certs
Warranty	12 months