Bacnet Device Object Instance Number Setting - Toshiba Carrier BMS-IFBN1281U-UL Service Manual

BN interface

10-2. BACnet Device Object Instance Number Setting

The instance number of the BACnet Device object is set when shipped according to the following rule. Change the instance
number using the engineering tool.
• Use 1Byte of Last byte of IP Address number
(1) Select "2: User Setting" from the "Device instance Number additional value" list in the input screen of the "System" tab.
Enter the Device object instance number into "Instance Number Setting".
(2) Use the following function to upload a setting file to the BN interface.
• Uploading a setting file (DEF File)
• Uploading a setting file (DEF File) by the USB Flash Drive
"System" tab input screen
92 -EN
Service Manual