3
Insert the battery
Inser t a 2CR5 (DL245) lithium batter y or a rechargeable
Nikon EN-EL1 lithium-ion battery (available separately) as shown
at right.
4
Close the battery-chamber cover
To prevent the battery from falling out of the camera during
operation, be sure the battery chamber is latched.
5
Check the battery level
After removing the lens cap (
check the battery level in the control panel.
Battery fully charged
Low battery
Replace the battery as soon as possible.
Battery exhausted
No photographs can be taken until the battery has been
replaced.
The battery-level indicator may briefly show
battery is re-inserted in the camera.
16
23), turn the camera on and
(battery fully charged) after an exhausted 2CR5 (DL245)