Using Viewnx 2 - Nikon D5100 User Manual

Using ViewNX 2

Step 1—Copy Pictures to the Computer
1
Choose how pictures will be copied to the computer.
Choose one of the following methods:
• Direct USB connection: Turn the camera off and ensure that the memory card is
inserted in the camera. Connect the camera to the computer using the
supplied UC-E6 USB cable and then turn the camera on.
• SD card slot: If your computer is equipped with an SD card slot, the card can be
inserted directly in the slot.
• SD card reader: Connect a card reader (available separately from third-party
suppliers) to the computer and insert the memory card.
If a message is displayed prompting you to choose a program, select
Nikon Transfer 2.
A
Windows 7
If the dialog shown at right is displayed, follow the
steps below to select Nikon Transfer 2.
1 Select Nikon Transfer 2 for Import pictures and
videos. Under Import pictures and videos, click
Change program. A program selection dialog will
be displayed; select Import File using Nikon Transfer 2 and click OK.
2 Double-click Import File.
2
Confirm that the correct source is
selected.
Confirm that the camera or removable disk
appears as a device button in the "Source"
panel of the Nikon Transfer 2 "Options" area.
Device button
Q
63