Advertisement
Quick Links
Installation and Instruction Manual Cascade Rack System
FOR YOUR SAFETY: This product must be installed and serviced by a professional service technician,
qualified in hot water boiler and heater installation and maintenance. Improper installation and/or
operation could create carbon monoxide gas in flue gases which could cause serious injury, property
damage, or death. Improper installation and/or operation will void the warranty.
Base Rack : ST1249
Installation and Instruction Manual
Cascade Rack
System
Model LT199NXX1 / LT199PXX1
LT199NRX1 / LT199PRX1
RTGS199N1 / RTGS199X1
RTGR199N1 / RTGR199X1
Base Rack : ST1249
Extension Rack : ST1250
S633100214 Rev 09/23
Extension Rack : ST1250
Advertisement
Related Manuals for Laars LT199NXX1
Summary of Contents for Laars LT199NXX1
- Page 1 Installation and Instruction Manual Cascade Rack System S633100214 Rev 09/23 Installation and Instruction Manual Cascade Rack System Model LT199NXX1 / LT199PXX1 LT199NRX1 / LT199PRX1 RTGS199N1 / RTGS199X1 RTGR199N1 / RTGR199X1 Base Rack : ST1249 Extension Rack : ST1250 FOR YOUR SAFETY: This product must be installed and serviced by a professional service technician, qualified in hot water boiler and heater installation and maintenance.
- Page 2 STOP! Follow these instructions or warranty will be void! WARNING This installation shall be done by a qualified service agency in accordance with these instructions, the installation manual included with the appliance to be mounted on this rack, all applicable codes, and requirements of the authority having jurisdiction. Failure to follow these instructions could result in substantial property damage, severe personal injury, or death.
- Page 3 WARNING NOTICE Installer - Read all instructions in this manual before Remove all items from the packaging and ensure that all parts installing. Perform steps in the given order. Obey all local and accessories are included in the kit. Any claims for damage codes.
- Page 4 M10 washers, and one M10 hex bolt secure the lower beam to the vertical post through each of the four mounting holes. If adding an extension rack insert the M10 Hex Bolt from the inside toward the extension rack to make adding the extension easier. 8.
- Page 5 ■ General Anchoring Instructions : WARNING 1. Position the stand in the installation location. 2. Once properly positioned, use a pencil to mark the This rack system must be properly anchored and secured to drill holes for the lag screws / expansion anchors. the floor BEFORE mounting appliances on it.
- Page 6 Figure 9 - Single Appliance Secured Lower Bracket Figure 10 - Secured Lower Bracket for Back to Back Appliance Mounting 4. See Figures 11, 12, 13 for mounted appliance Figure 13 - Mounted Side by Side Appliances (Possible with images. Extension Rack) 5.