Burton Safes PS610 User Instructions

PS310/E92
Home Safe Size 1-3 Lock
PS610/E36
Home Safe Size 4 Lock

How to close the safe

• Ensure that the bolts are fully retracted
(if necessary rotate the handle clockwise to
retract the bolts)
• Gently push the door shut. Always ensure
that there are no objects or people in the
way of the closing door
• Turn the handle anti-clockwise until
the stop position is reached
burtonsafes.co.uk
USER INSTRUCTIONS
PS310 & PS610 Lock

About the lock

This lock requires a 6-digit code to open the
lock. You can have a master code and up
to 9 user codes.
In order to activate the user codes, you will
need the master code.
The master code can't be deleted but you can
remove user codes. The lock also features
dual code opening and time delay opening.
Issue 1

How to open the safe

• Press the [ON] key
• Enter a valid 6-digit code
(the factory default is '123456')
• Press the [ENTER] key
• Within 4 seconds, turn the handle clockwise
until the stop position is reached
• Open the safe door

Incorrect Entry

• If an incorrect code has been entered, the red
LED will flash
• After 3 incorrect entries, a penalty time of 1
minute will begin. During this time no other
code entries can be made
• When the penalty time is over press the [ON] key
• Enter a valid 6-digit code
Everytime an incorrect entry code is
entered continuously the penalty time is
extended for 2, 4, 8, up to the maximum
of 16 minutes

Changing the master code

• Open the lock using a valid
6-digit master code
• Open the safe door
• Press the [ON] key
• Press the [ENTER] key
• Press key [1] followed by the [ENTER] key
• Enter the existing 6-digit master code (the
factory default is '123456')
• Press the [ENTER] key
• Enter a new 6-digit code followed
by the [ENTER] key
• Re-enter the new 6-digit code,
then press the [ENTER] key to confirm