Table of Contents
Advertisement
Quick Links
USER INSTRUCTIONS - PS310 LOCK
ABOUT THE LOCK
This lock requires a 6-digit code to open the
lock. You can have a master code and up to 9
user codes. In order to activate the user codes,
you will need the master code. The master code
can't be deleted but you can remove user codes.
The lock also features dual code opening and
time delay opening.
How to open the safe
• Press the [ON] key
• Enter a valid 6-digit code (the factory default is '123456')
• Press the [ENTER] key
• Within 4 seconds, turn the handle clockwise until the stop position is
reached
• Open the safe door
Incorrect Entry
• If an incorrect code has been entered, the red LED will flash
• After 3 incorrect entries, a penalty time of 1 minute will begin. During
this time no other code entries can be made
• When the penalty time is over press the [ON] key
• Enter a valid 6-digit code
NOTE: Everytime an incorrect entry code is entered continuously the penalty time is
extended for 2, 4, 8, up to the maximum of 16 minutes
How to close the safe
• Ensure that the bolts are fully retracted (if necessary rotate the handle
clockwise to retract the bolts)
• Gently push the door shut. Always ensure that there are no objects or
people in the way of the closing door
• Turn the handle anti-clockwise until the stop position is reached
5
Advertisement
Table of Contents
Related Manuals for Burton Safes PS310
Summary of Contents for Burton Safes PS310
- Page 1 USER INSTRUCTIONS - PS310 LOCK ABOUT THE LOCK This lock requires a 6-digit code to open the lock. You can have a master code and up to 9 user codes. In order to activate the user codes, you will need the master code. The master code can’t be deleted but you can remove user codes.
- Page 2 Changing the master code • Open the lock using a valid 6-digit master code • Open the safe door • Press the [ON] key • Press the [ENTER] key • Press key [1] followed by the [ENTER] key • Enter the existing 6-digit master code (the factory default is ‘123456’) •...
- Page 3 Changing a user code (using a user code) • Press the [ON] key • Press the [ENTER] key • Press key [3] followed by the [ENTER] key • Enter the user number for the code you wish to change, i.e. key [2] •...
- Page 4 • Within 4 seconds, turn the handle clockwise until the stop position is reached • Open the safe door Programming the Time Delay A Time Delay is the time you have to wait in between the entry of your code and the opening of your safe. An Open Window is the amount of time you have to open your safe after the time delay.
- Page 5 A series of beeps indicates that the battery is weak and must be replaced. • Only use 9V ALKALINE batteries with this lock • Burton Safes recommend the Duracell brand To change the battery, you will need to open the safe and remove the plate on the back of the door with a small screwdriver.
Need help?
Do you have a question about the PS310 and is the answer not in the manual?
Questions and answers