Hama 121775 Operating Instructions Manual page 4

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instruc-
tions and information completely. Please keep
these instructions in a safe place for future ref-
erence. If you sell the device, please pass these
operating instructions on to the new owner.
1. Explanation of Warning Symbols and
Notes
Warning
This symbol is used to indicate safety
instructions or to draw your attention to
speci c hazards and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• Scart to HDMI converter
• USB cable
• These operating instructions
3. Safety Notes
• The product is intended for private, non-com-
mercial use only.
• Protect the product from dirt, moisture
and overheating, and only use it in a dry
environment.
• Keep this product, as all electrical products,
out of the reach of children!
• Use the product for its intended purpose only.
• Do not use the product in the immediate
vicinity of heaters or other heat sources or in
direct sunlight.
• Do not operate the product outside the power
limits given in the speci cations.
• Do not use the product in areas where the
use of electronic devices is not permitted.
• Do not use the product in moist environments
and avoid splashes.
• Do not drop the product and do not expose it
to any major shocks.
• Do not modify the product in any way. Doing
so voids the warranty.
• Keep the packaging material out of the reach
2
of children due to the risk of suffocation.
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not open the device or continue to
operate it if it becomes damaged.
• Do not attempt to service or repair the
product yourself. Leave any and all service
work to quali ed experts.
4. Introduction
The converter can be used universally, and has
a Scart input and a digital HDMI output. It is
used to convert an analogue image and audio
transmission into a digital signal. It therefore
allows you to connect playback devices that only
have a Scart interface, such as video recorders,
set-top boxes, DVD players or game consoles,
for example, to a monitor or at-screen TV with
a HDMI input.
5. Getting started and operation
Note
• Always refer to the operating instructions
for all the devices you are connecting.
• Lay all cables so that they do not pose a
tripping hazard.
• Do not bend or crush the cable.
Before installation, ensure that all devices to be
connected are switched off.
• Connect the Scart input (1) of the converter
to your playback device, for example, DVD
player or set-top box, using a Scart cable (not
included in delivery package).
• Connect the HDMI output (2) of the converter
to the corresponding input on a TV or monitor
using a HDMI cable (not included in delivery
package).
• Connect the supplied USB cable to the
'DC/5V' connection (3).
• Connect the USB cable to an unused USB
input on your PC or TV. The power LED (4)
lights up red.
• Alternatively, the converter can be operated
using a suitable USB power supply unit (not
included in delivery package). Please refer to
the operating instructions for the USB power
supply unit used.