Advertisement
USER MANUAL
Body Material
Can be opened by
Optical Sensor
Fingerprint
Entry
Memory
Keypad Entry
Locking System
High Security Keys
LCD display
Sounds Mode
Warning Beep
Time Out
LED light
Warranty
Batteries
Included Accessories
Fireproof
Door Thickness
Body Thickness
Not recommend for age groups 55 and above. Due to thinning fingerprints
DISCLAIMER:
ALL fingerprint readers will lose accuracy with increasing age.
Remember to Register your safe, email us with your order number and serial
number of your Viking safe. Questions? Latest manual and useful tips, visit
11-16-2021
©
GREEN LIGHT VERSION
Steel
Fingerprint / PIN code / Key
500 DPI, opens in fraction of a second
Stores up to 32 fingerprints,
Non-volatile memory - Registered PIN and Fingerprints are SAVED when batteries
are removed.
Opens with 4-8 digits PIN code
Motorized door, deadbolt lock
4 prong cross keys. Two included.
Battery Level indicator, OK and Error indicator, etc.
ON / OFF optional
Safe beeps if door is left unlocked for more than 1 minute (*Warning Beep is
disabled if the safe is unlocked with Key)
Operation is put on HOLD for 2 minutes if multiple incorrect PIN or fingerprints are
input
Build in LED light operates independently with 2 AA batteries
One-Year Limited Warranty
4 AA
Mounting hardware and batteries
No
5 mm
2 mm
www.vikingsecuritysafe.com
®
NEW
MODELS:
VS-12BL WALL SAFE
VS-14BL TOP OPENING DRAWER SAFE
VS-20BLX MINI
VS-25BL
VS-25DBLX (VS-25DBL*) SMALL DEPOSITORY SAFE
VS-35BLX (VS-35BL*)
VS-38BLX (VS-38BL*) EXTRA WIDE LAPTOP SAFE
VS-50BLX (VS-50BL*) LARGE
VS-52BLR (VS-52BL*) HIDDEN WALL SAFE
VS-52BLX HIDDEN WALL SAFE LASER CUT
* Models may change name with improvements and modifications
| Help@VikingSecuritySafe.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Viking Security Safe VS-12BL
Summary of Contents for Viking Security Safe VS-12BL
- Page 1 ® USER MANUAL © GREEN LIGHT VERSION MODELS: VS-12BL WALL SAFE VS-14BL TOP OPENING DRAWER SAFE VS-20BLX MINI VS-25BL VS-25DBLX (VS-25DBL*) SMALL DEPOSITORY SAFE VS-35BLX (VS-35BL*) VS-38BLX (VS-38BL*) EXTRA WIDE LAPTOP SAFE VS-50BLX (VS-50BL*) LARGE VS-52BLR (VS-52BL*) HIDDEN WALL SAFE...
- Page 2 VIKING SECURITY SAFE USER'S MANUAL IMPORTANT - READ FIRST TEST ALL FUNCTIONS OF YOUR SAFE. THEN BOLT IT DOWN TO A PERMANENT LOCATION. • If you used Key to UNLOCK your safe, use Key to Lock it. If you USED PIN or Fingerprint, LOCK it electronically with button.
- Page 3 NOTE If you Unlock your safe with Key, use Key to Lock it. If you Unlock it with PIN or Fingerprint, LOCK it electronically with # BEFORE FIRST USE 1. UNLOCK your safe with Key and open the door. (Remove Logo Plate, to access the keyhole) 2.
-
Page 4: Tips And Troubleshooting
NOTE If you Unlock your safe with Key, use Key to Lock it. If you Unlock it with PIN or Fingerprint, LOCK it electronically with # HOW TO UNLOCK AND LOCK THE SAFE WITH YOUR FINGERPRINT 4.1. UNLOCK: Press Fingerprint Activation Button when Green light comes on, place registered fingerprint on the Glass Fingerprint Reader. -
Page 5: Mounting Instructions
SCENARIOS REASON AND SOLUTION 9.5. “I only have a Key to access Unlock your safe with the Key. While your safe is in UNLOKCED my safe. I do not have PIN, nor position, remove 1 battery and Press any button on the keypad. Put registered fingerprints. -
Page 6: Mounting Method
Secure safe in a proper area to prevent from falling and causing damage or injury • DO NOT disassemble the product. For all repairs, contact Viking Security Safe Customer Service Give Viking Security Safe a chance to help if you have questions or an issue with your safe.
Need help?
Do you have a question about the VS-12BL and is the answer not in the manual?
Questions and answers
Trying to reset safe. I already replaced the batteries. When holding the red button nothing comes up on the screen
The manual states that to reset the Viking Security Safe VS-12BL to factory defaults, you need to press and hold the red button (A) for 10 seconds until "INIT" flashes on the LCD display, followed by "OK." If the screen does not respond when holding the red button, ensure the safe has power by checking or replacing the batteries. If the issue persists, contact Viking Security Safe Customer Service for further assistance.
This answer is automatically generated