TABLE OF CONTENTS Features and descriptions How to unlock the safe How to lock the safe How to change your pin combination How to install/replace batteries on the LED light How to mount the safe How to set up the combination cable lock (for models with combination cable lock only VS-12LSX) Troubleshooting www.vikingsecuritysafe.com...
FEATURES AND DESCRIPTIONS INTERIOR LED LIGHT SLEDGEHAMMER PROTECTED HINGE GENUINE SIMPLEX LOCK ANTI-PRY INSERTION SLOT PROTECTIVE LOCK CHAMBER CARPETING ON ALL SIDES FITS MULTIPLE HANDGUNS 5mm / 3/16"DOOR THICKNESS LASER CUT IMPORTANT Keep the Door Open, Program, and Fully Test functionality multiple times. Do not close the door till you are sure your safe is programmed and work flawlessly.
Page 4
FEATURES AND DESCRIPTIONS IMPORTANT Depending on the model of your safe, the Knob of the Simplex lock may be on the left or right when facing it. The push button farthest from the Knob is always # 1, then # 2, and on. The Knob is always the last button when counting.
HOW TO UNLOCK THE SAFE NOTE Make sure you hear a clicking sound, confirming the push buttons are pressed and/or the knob is rotating correctly. Turn the Knob to the LEFT (To Clear the Lock). 2.1. NOTE The default PIN: Simultaneously push buttons # 2 and # 4 and then # 3. Press down Buttons # 2 and # 4 simultaneously.
HOW TO CHANGE YOUR PIN COMBINATION IMPORTANT Keep the door open and TEST your New Combination SEVERAL times before shutting the door and locking your safe. Each button may only be pushed once in your new combination. NOTE: • Use any Button from # 1 to # 5 for your •...
HOW TO INSTALL/REPLACE BATTERIES ON THE LED LIGHT Unscrew the little screw on the LED light. 5.1. Carefully pull down the left (screw) side first and slide out the LED light. Install 2 new AA batteries and test by 5.2. pressing the lever down.
HOW TO MOUNT THE SAFE IMPORTANT Program, Test and Inspect your safe Multiple times with the door open, before you mount your safe to a permanent Location. IT IS RECOMMENDED TO BOLT DOWN THE SAFE TO A PERMANENT LOCATION. Find the pre-drill holes. Depending on the 6.1.
HOW TO SET UP THE COMBINATION CABLE LOCK (FOR MODELS WITH COMBINATION CABLE LOCK ONLY VS-12LSX) IMPORTANT The lock is set with the Default Factory PIN 0000. Change the PIN to your personal PIN code before you start using the lock. HOW TO CHANGE THE PIN TO YOUR 7.2.
TROUBLESHOOTING COMING SOON Give Viking Security Safe a chance to help with questions or an issue with your Viking safe. Please, let us know how you like your new Viking safe. www.vikingsecuritysafe.com | help@vikingsecuritysafe.com page 10/10 10-27-2022...
Need help?
Do you have a question about the SX line VS-12SX and is the answer not in the manual?
Questions and answers