BLUE SKY OKCSS2317-SINK Owner's Manual page 5

DRAINER TO SINK ASSEMBLY
Before assembling the sink drainer
(B) to the Sink (A) and Installing the
sink make sure the Sink Cabinet is fully
assembled with the sink top in place.
Place the sink into the sink top opening
to insure fit. Remove the sink from the
top for easier drainer assembly.
Open the Sink strainer set (B), remove
the Drainer stopper and basket and set
aside. Unscrew the Drain Housing from
the Drain Body and set gaskets aside.
Slide Foam Gasket onto Drainer Body,
and over the threaded area. Slide the
Drainer Body through the sink opening
from above the sink.
With the Sink Body Bottom going
through the sink base, slide the rubber
gasket from underneath the sink onto
the drainer body bottom, and over the
threads.
Thread the drain housing over the
bottom of the Drain Body from
underneath the sink until tight - do not
over tighten.
5 | www.bluesk youtdoorliving.com
Drain Stopper
Strainer Basket
Foam Gasket
Drainer Housing
Drainer Body
Sink
Drainer Housing
Drainer Body
Rubber Gasket
Foam Gasket
Rubber Gasket