Hisense HR6BMFF519B Operation Manual page 9

9
1. Tilt appliance to find screw hole on the
left of lower base cover.
l o w e r b a s e c o v e r
2. Put screw into the hole of rubber
supporting pad.
s c r e w
r u b b e r s u p p o r t i n g p a d
3. Make screw in alignment with the hole
on lower base cover. Fasten rubber
supporting pad to the base cover firmly by
a cross screwdriver (self-provided).
①
c r o s s s c r e w d r i v e r
②
③
Reversing the door
The side at which the door opens can be
changed, from the right side (as supplied)
to the left side if required.
Warning! When reversing the door, the
appliance must not be connected to the
mains, Ensure that the plug is removed
from the mains socket
Not provided
Wrench(8mm)
Thin-blade
screwdriver
Additional parts (in the plastic bag)
Allen Wrench(4mm)
Philips Screwdriver
Monkey wrench