Nabis A05017 Instructions Manual page 5

Bath Shower Mixer
1. Identify all components and check for completeness, particularly before commencing installation.
2. Fit the legs to the tap body using the sealing washer.
3. Ensuring that the anti-rotational washer is fitted to tap body. Then fit the mixer to the bath using backnut.
4. Connect the hot and cold water supplies to tap body.
5. Fit the shower hose to the crade of the tap body using small washer (supplied in the pack).
6. Fit the shower hose to handset using small washer (supplied in the pack).
7. Turn on the mains water supply letting the water flow for a few minutes to flush through the system.
8. Operate the mixer in both bath and shower mode. To switch from bath to shower mode, move the diverter lever from one
extreme to the other.
9. Check all joints and connections for any leaks.
Bath Filler
1. Identify all components and check for completeness, particularly before commencing installation.
2. Fit the legs to the tap body using the sealing washer.
3. Ensuring that the anti-rotational washer is fitted to tap body. Then fit the mixer to the bath using backnut.
4. Connect the hot and cold water supplies to tap body.
5. Turn on the mains water supply letting the water flow for a few minutes to flush through the system.
6. Check all joints and connections for any leaks.
Handset
Shower hose
Legs
Sealing washer
Anti-rotational washer
Backnut
Legs
Sealing washer
Anti-rotational washer
Backnut
Tap body
Tap body