Installation - Electrolux EHD30000K User Manual

22 electrolux
• Use only the accessories delivered with
appliance.
• Be careful when you connect the appli-
ance to the near sockets. Do not let elec-
tricity bonds touch the appliance or hot
cookware. Do not let electricity bonds
tangle.
• If there is a crack on the surface, discon-
nect power supply to prevent the electric
shock.
How to prevent a damage to the
appliance
• If the objects or cookware fall on the
glass ceramic, the surface can be dam-
aged.
• Cookware made of cast iron, cast alumi-
nium or with damaged bottoms can
scratch the glass ceramic if you move
them on the surface.

INSTALLATION

Installation
Warning! Read and follow the
instructions carefully. There is a risk of
injury or damage to the appliance.
• Make sure that the appliance is not dam-
aged because of transportation. Do not
connect a damaged appliance. If it is
necessary, speak to the supplier.
• Installation and connection of the ap-
pliance to the power supply must on-
ly be done by qualified personnel.
• Only use built-in appliances after you as-
semble the appliance into correct built-in
units and work surfaces that obey the
standards.
• Do not change the specifications or mod-
ify this product. There is a risk of injury or
damage to the appliance.
• Fully obey the laws, ordinances, direc-
tives and standards in force in the coun-
try where you use the appliance (safety
regulations, recycling regulations, electri-
cal safety rules etc.).
• Keep the minimum distances to other ap-
pliances and units.
• Install anti-shock protection, for example
install the drawers only with a protective
panel directly below the appliance.
• Do not let cookware boil dry to prevent
the damage to cookware and glass ce-
ramics.
• Do not use the cooking zones with empty
cookware or without cookware.
• Do not cover the parts of the appliance
with aluminium foil.
• Leave a ventilation space of 5 mm
between the worktop and front of the
unit below it.
Disposal of the appliance
• To prevent the risk of physical injury or
damage
– Disconnect the appliance from the
power supply.
– Cut off the mains cable where it con-
nects with the appliance and discard it.
– Speak to your local authorised facilities
for disposal of your appliance.
• Prevent damage of the cut surfaces of
the worktop against moisture with a cor-
rect sealant!
• Seal the appliance to the worktop with no
space left with a correct sealant.
• Prevent damage of the bottom of the ap-
pliance from steam and moisture, e.g.
from a dishwasher or oven.
• Do not install the appliance adjacent to
doors and below windows. Hot cook-
ware can be hit off the hob when you
open doors or windows.
• Disconnect the appliance from the
electrical supply, before you do
maintenance work or cleaning.
Warning! Risk of injury from electrical
current. Carefully obey the instructions
for electrical connections.
• The electrical mains terminal is live.
• Make the electrical mains terminal free of
voltage.
• Install correctly to give anti-shock protec-
tion.
• Loose and incorrect mains plug and
socket connections can make the termi-
nal become too hot.
• A qualified electrician must install the
clamping connections correctly.
• Use a strain relief clamp on cable.