Content CAREFULLY READ THIS USER’S MANUAL BEFORE PUTTING THE TELEVISION INTO OPERATION. KEEP IT FOR FUTURE USE. RECORD THE MODEL NUMBER AND THE SERIAL NUMBER OF THE TELEVISION. SEE THE LABEL ON THE REAR COVER AND PROVIDE THIS INFORMATION TO YOUR VENDOR IN THE EVENT THAT YOU REQUIRE REPAIRS.
Important safety instructions 1. Important safety instructions If you want to use this product correctly, carefully read this user’s manual and store it for future reference. If you give (sell) the appliance to somebody, please also include all the documentation together with this appliance, including this user’s manual. To reduce the risk of injury by electrical shock do not remove the cover (or the...
Page 5
Important safety instructions Installation, operation – Install the appliance according to the instructions in the user’s manual. – Leave free space on all sides of the appliance necessary for proper air circulation. This removes the heat created during operation. Covering the ventilation openings of the appliance’s case creates a risk of overheating or damaging the appliance.
Page 6
Important safety instructions – Before turning on the appliance, check that the electrical connection is performed properly and in accordance with the instructions of the manufacturer. Before connecting or changing the connection, turn off the appliance and disconnect it from the mains.
Page 7
Important safety instructions Note: Only connect the appliance to a properly grounded socket with a protective grounding pin. Note: If you will be installing the appliance on a wall or to the ceiling, follow the manufacturer’s instruction found in the user’s manual of the particular appliance. Repairs and maintenance –...
Page 8
Important safety instructions Remote control and batteries – Do not expose the remote control or the batteries to direct sunlight or sources of heat, such as heaters, heat exchangers, stoves or other appliances (including amplifi ers) that produce heat. Do not use or leave the appliance in the vicinity of an open fi re. –...
Page 9
Important safety instructions DVD player This device is equipped with a built-in DVD player. For safety reasons, as a rule, the disc drive is located on the side of the device, thus preventing exposure to laser radiation. Under no circumstances should you in any way attempt to modify or change the disc drive opening.
Page 10
Important safety instructions Cleaning discs – Fingerprints and dust affect the quality of the image while playing the recording from the disc. Prior to use, wipe the disc from the centre outwards using a clean lint-free cloth. – Do not use any solvents such as thinners, benzol (benzene), standard cleaning agents or anti-static sprays.
Page 11
Important safety instructions Region code This player is intended for playing DVD video designated by the code for region 2 or ALL (discs designated in this way can be played by all DVD players). You can fi nd the region code of the disc on its label, the region code of the player is located on its rear or under side.
Page 12
Important safety instructions Notes on the USB connector: – USB memory devices must be inserted into the appliance directly. To prevent data transmission failure or its interference, do not use USB extension cables. Electrostatic discharges may cause the appliance to malfunction. In such an event the user must restart the appliance.
Stand assembly 2. Stand assembly Before attaching/detaching the stand, ensure the television is switched off and unplugged from the power outlet. Before performing work spread cushioning (e.g. soft blanket) over the base area to lay the LED TV on this will prevent it from being damaged. Make sure the stand is properly assembled so that the TV would be stable.
Device description 3. Device description 3.1. Control panel button function The buttons on the lower-right panel control your TV´s basic features, including the on-screen menu. To use the more advanced features, you should use the remote control. Note: Pictures are only for illustration. POWER: Turn on/off VOL- VOL+/-: adjust volume...
Remote control 4. Remote control POWER: Turns the LCD TV on and into standby mode. AUDIO I/II: Switch the audio channel of multimedia playing. MUTE: Mutes and restores your LCD TV sound. 0-9: Pressing a number selects a channel. 5. SLEEP: Set the sleep timer. : Switches back and 6.
Page 17
Remote control 17. GUIDE: Displays the Program Guide on the screen in DTV mode. Press again to turn GUIDE off. : Freeze a multi-page changing on Teletext mode. 18. DTV/RADIO: In DTV mode, press DTV/RADIO button to enter DTV or RADIO mode. 19.
First time setup 5. First time setup Press INPUT button to display the input source list. Press / or OK button to select the desired input source. Press OK button to enter the input source. Press EXIT button to quit. Connect an RF cable from the Tv’s input called “RF-In”...
First time setup 5.4. Auto Tuning Select among Analogue (ATV) or digital (DVT) or leave both sources ATV+DTV. ATV tuning will start fi rst. If you want to skip ATV tuning, press MENU button and left arrow button. Then DTV tuning will start. To skip DTV tuning, press MENU button and left arrow button. EN 17 06/2016 2016...
Page 20
First time setup Note: If an automatic tuning do not fi nd any receivable channel (e.g. inconvenient antenna) or you have paused it manually, you can still tune channels manually, one by one, as it is described down in the manual. To do so, you will need some technical data about channel you wish to tune, such as broadcast way, frequency, audio modes, broadcast speed etc.
Menu 6. Menu 6.1. Channel menu Press MENU button to display the main menu. Press / button to select CHANNEL in the main menu. Press / button to select the option that you want to adjust in the CHANNEL menu. Press Enter button to adjust.
Page 22
Menu 6.1.2. ATV manual tuning Current CH Set the channel number. Color System Select the color system (available systems: AUTO, PAL, SECAM). Sound System Select the sound system. Fine-Tune Adjust the frequency of the channel fi nely. Search Start searching channel. 20 EN 06/2016 2016...
Page 23
Menu 6.1.3. DTV manual tuning Press / button to select DTV Manual Tuning, then press Enter button to enter sub-menu. Press / button to select channel, then press Enter button to search program. 6.1.4. Program Edit Press ...
Page 24
Menu 6.1.5. Schedule list You can program certain events fi xed in time in digital broadcasting. Such planned (programmed) events are saved in the List. Press / button to select Schedule List, then press Enter button to enter sub-menu. It is available in source.
Menu 6.1.6. Signal information Press / button to select Signal Information, press the Enter button to see the detail information about the signal. Only available when there is signal in DTV. Use programs/channels with the highest values of both variables, max. is 100 for a satisfactory reception.
Page 26
Menu 6.2.1. Picture mode Press / button to select Picture Mode, then press OK button to enter sub-menu. You can change the value of contrast, brightness, color, sharpness and tint when the picture is in Personal mode. Tip: You can press PMODE button to change the Picture Mode directly.
Page 27
Menu Increase the blue tone for the white. Cold Increase the sex-linked colors for the white. Normal Increase the red color for the white. Warm 6.2.3. Noise Reduction To fi lter out and reduces the image noise and improve picture quality. Press ...
Menu 6.3. Sound menu Press MENU button to display the main menu. Press / button to select SOUND in the main menu. Press / button to select the option that you want to adjust in the SOUND menu. Press Enter button to adjust.
Page 29
Menu Tip: You can press SMODE button on the remote control to change the Sound Mode directly. Standard Produces a balanced sound in all environments. Preserves the original sound. Good for musical programs. Music Enhances treble and bass for a rich sound experience. Movie Enhances vocals for sports.
Menu 6.4. Time menu Press MENU button to display the main menu. Press / button to select TIME in the main menu. Press / button to select the option that you want to adjust in the TIME menu. Press Enter button to adjust.
Page 31
Menu 6.4.2. Sleep timer Press / button to select Sleep Timer, then press Enter button to enter sub-menu. Press / button to select. (Available options are:Off,10min,20min,30min,60min, 90min,120min,180min,240min). 6.4.3. Auto standby Press / button to select Auto Standby, then press Enter button to enter sub-menu. Press ...
Menu 6.4.4. OSD timer Press / button to select OSD Timer, then press Enter button to enter sub-menu. Press / button to select how long the setting will be displayed before automatic shut off. 6.5. Lock menu Press MENU button to display the main menu.
Page 33
Menu 6.5.1. Lock system Press / button to select Lock System, then press Enter button to make the following 3 options valid. 6.5.2. Set password Press / button to select Set Password, then press Enter button to enter sub-menu to set new password.
Page 34
Menu 6.5.3. Channel lock Press / button to select Channel Lock, then press Enter button to enter sub-menu to select. Press button to lock or unlock the channel. Green 6.5.4. Parental Guidance Press / button to select Parental Guidance, then press Enter button to enter sub- menu to select the number of age which is suitable for your children.
Menu 6.5.5. Key lock Press / button to select Key Lock, then press / button to select Off or On. When Key Lock’s statue is on, you can’t use the Key panel button. 6.6. Hotel mode Hotel mode serves to limit the TV functions for easier usage in place where for example maximum volume or tuning should be limited.
Menu 6.6.4. Max volume Press / button to select Max Volume, then press / button to adjust. 6.6.5. Clear lock Press / button to select Clear Lock, then press Enter button to clear the setting you have done before.
Page 37
Menu 6.7.2. TT language Press / button to select TT Language, then press Enter button to enter sub-menu. Press / / / button to select TT language. 6.7.3. Audio Languages Press / button to select Audio Languages, then press Enter button to enter sub- menu.
Page 38
Menu 6.7.4. Subtitle Language Press / button to select Subtitle Language, then press Enter button to enter sub- menu. It serves to automatically select a certain language if this is available. You can select 2 languages – fi rst and second. If the desired language is not available, the system will select a language of the broadcaster.
Page 39
Menu WARNING Formatting will delete all data on the memory stick! Note: Firstly try each USB device for speed and record reliability. In case of unsatisfactory result, change it to other one, particularly faster. USB device speed is a key parameter of a reliable record and time shift.
Page 40
Menu 6.7.11. Software Update (USB) Press / button to select Software Update (USB), plug your USB device in the USB slot, then press Enter button to update the right software. WARNING Run the software update only if you have an original software to the correct model from the manufacturer including the changes description.
Menu Auto Standby Press / button to turn the Auto Standby on or off. Device List Press Enter button to open the main menu of device. 6.8. Screen menu (only PC mode) Press MENU button to display the main menu. Press ...
Page 42
Menu 6.8.3. V-Offset Adjust the vertical position of the picture. Press / button to select V-Offset, then press Enter button to enter sub-menu 6.8.4. Size Adjust the display size. Press / button to select Size, then press Enter button to enter sub-menu. 6.8.5.
7. USB Note: Before operating Media menu, plug in USB device,then press INPUT button to set the Input Source to Media . TV will recognise majority of USB devices and it will shortly show the menu for playback. If there is no action, menu disappears and the previous mode will be on.
7.1. Photo menu Press / button to select PHOTO in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu and exit menu to quit. Press / button to select the fi le you want to watch in the fi le selecting menu, then press ENTER button to display picture.
7.2. Music menu Press / button to select MUSIC in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu and exit menu to quit. Press / button to select drive disk you want to watch, then press Enter button to enter.
7.3. Movie menu Press / button to select MOVIE in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu and exit menu to quit. Press / button to select drive disk you want to watch, then press Enter button to enter.
7.4. Text menu Press / button to select TEXT in the main menu, then press Enter button to enter. Press Exit button to return to the previous menu and exit menu to quit Press / button to select drive disk you want to watch, then press Enter button to enter.
DVD player 8. DVD player Supported DVD formats CD Digital Audio 12 cm / Dolby Digital AC-3 CD-R/CD-RW/CD+RW HDCD VCD/SVCD DVD / DVD-R / DVD-RW / DWD+R / DWD+RW JPEG / AVI / MP4 / DAT MPEG 1 / MPEG 2 DivX 3.11 / 4.x / 5.x / Ultra XvID 46 EN...
Trouble shooting guide 9. Trouble shooting guide WARNING Under no circumstances should you try to repair the device yourself, the device does not contain any parts that a user could repair himself. Always take the device to the authorised service centre in case of repair, adjustment or any other maintenance.
Page 50
Trouble shooting guide Symptoms Possible solutions No response to remote control Batteries of remote control may have exhausted, if necessary, change the batteries. Clean the remote control lens. The distance between LED TV and remote control should be within 8m, within recommended operating angle and path is fee of obstructions.
Page 51
Trouble shooting guide Symptoms Possible solutions Picture is distorted, macroblock, Compression of video contents may cause distortion small block, dots, pixelization, especially on fast moving pictures such as sports and etc. action movies. Noise from speakers Check cable connections, make sure a video cable is not connected to an audio input.
Technical specifi cations 10. Technical specifications Model SLE 22F59DTC Panel size 22" Consumption 20 W Standby power consumption <0.5 W Nominal voltage 230 V Remote control Included VESA wall mount 100 x 100 Dimensions with stand (W × H × D) 506 x 160 x 352 mm Dimensions w/o stand (W ×...
Page 53
Technical specifi cations Stereo sound NICAM/A2 Sound output Headphone jack PVR recording to USB Pitch correction Progressive Scan Timeshift function Electronic Programme Guide EPG Teletext Teletext pages 1000 Comb fi lter OSD menu Zoom Noise reduction Timer off /on/sleep Subtitles Audio language Channel list Favourites list...
Page 54
Technical specifi cations Information sheet Importer: FAST ČR, a.s., Černokostelecká 1621, 251 01 Říčany Brand Sencor Model SLE 22F59DTC Energy effi ciency class Screen diagonal in cm/inches [cm/"] 55/22 Electric energy consumption when on [W] Annual electric energy consumption* [kWh] Electric energy consumption in standby mode [W] ≤0.5W...
Page 55
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site. DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical &...
Page 56
Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial number or the warranty seal has been damaged). Authorized service centers Visit www.sencor.eu for detailed information about authorized service centers. 54 EN 06/2016 2016...
Page 57
® Designed in Europe by Sencor , Made in China...