Main Screen - Toshiba 43 QF5D Series Operating Instructions Manual

free trial at this point. Highlight 'Not now' and press
Select to skip.
37. Welcome to Fire TV
Brief information on the use of your Fire TV will be
provided on the next screen. After reading press
Select to continue.
38. Scan for TV channels
You will be asked whether you want to scan for
channels in the next step. Highlight Yes and press
Select button to start the scan process. Highlight No
and press Select button to scan later.
Before the scan starts, you will be asked to check if
your aerial is set up and your antenna cable is plugged
properly into the antenna socket on your TV. Press
Select to proceed.
39. Channel Type
The next step is the selection of the channel type.
Select your scanning preference to install channels
for Live TV function. Cable/Terrestrial and Satellite
options will be available.
If the Cable/Terrestrial option is selected, the TV will
search for digital terrestrial or digital cable broadcasts.
Select the transmission method on the next screen and
press Select to start search.
If the Satellite option is selected, you can choose an
operator on the next step, if any available. You can also
choose to perform manual or complete channel scan
or import a channel list from a connected USB storage
device. Highlight the operator option you prefer and
press Select to proceed. If an operator different than
the default one is selected, a confirmation dialogue is
displayed. Highlight Yes and press Select to continue
with the selected operator. The Satellite Connection
screen will be displayed next. Depending on your
previous selections some options may be preset
automatically. Change if necessary and proceed.
If you have a suitable channel list that was previously
exported to a USB storage device, you can also use
the Customised Channel List option at this point.
Connect the USB storage device to your TV, highlight
this option and press Select to proceed.
If you select the Complete Channel Scan or
Manual Channel Scan option, you will have to
select the satellite in the next step. Then the Satellite
Connection screen will be displayed. Set the LNB
Type, LNB Power, DiSEqC Version, Single Cable,
ToneBurst, and Scan Mode options manually
corresponding to your environment on the next screen.
When you set the DiSEqC Version option, the Port
option will become available. You will need to set the
diseqc port using this option after setting the diseqc
version. If you select Manual Channel Scan, you
will need to configure the Frequency, Polarisation,
and Symbol Rate options additionally before the
scan starts.
When complete press the Play/Pause button. The TV
will start to search available broadcasts.
While the search continues you can press the Select
button to cancel. A dialogue will be displayed for
confirmation. Highlight Yes and press Select to cancel.
When the initial setup is completed "Channel Scan
Complete" message will be displayed. You can choose
to make changes on the channel list or rescan at this
point. Highlight Done and press Select to finish the
setup.
Profile selection screen will be displayed next. You can
select a profile, add a new one or edit profile settings.
Highlight the profile you want to continue with and
press Select.
Home screen will be displayed. In order to switch to
Live TV mode and watch TV channels press the Live
button on the remote (availability depends on the
model of the remote). You can also select the Aerial
or Satellite input option from the Inputs row in the
inputs tab on the Home screen and press Select to
start watching.

Main Screen

To enjoy the benefits of your Amazon Fire TV, your TV
must be connected to the Internet. Connect the TV to a
home network with a high-speed Internet connection.
You can connect your TV wirelessly or wired to your
modem/router. Refer to the Network and Connecting
to the Internet sections for further information on how
to connect your TV to the internet.
The main screen is the centre of your TV. Press the
Home button on your remote to display the main
screen. From the main screen you can start any
application, switch to a TV channel, watch a movie or
switch to a connected device, manage the settings.
Depending on your TV setup and your country
selection in the initial setup the main screen may
contain different items.
The main screen is organized into several tabs.
Profiles, Inputs, Find, Home, My Stuff, Live, App
Peeks, My Apps and Settings (gear wheel symbol)
tabs will be available. You can scroll through them
using the directional buttons. Available tabs may differ
depending on the network connection status of your
TV, the Amazon account you signed in and whether
you signed in to it. Move the focus to the desired tab
option to display the content. Available options of the
highlighted tab will be positioned in rows generally.
To navigate through the options use the directional
buttons on the remote. Select a row then move the
focus to the desired item in the row. Press Select
button to make a selection or to enter a sub-menu.
English - 11 -