Electrolux Unirapido ZB2803 Owner's Manual page 4

4
Unpacking and assembly
1. Fit the handle by carefully inserting it into the
lower main body. Make sure that the cable does
not jam.
Charging station
1. Position the charging station close to a mains
(well away from heat sources, direct sunlight or wet
places). Insert the adaptor into the mains socket
and connect it to the charging station.
2. Secure the handle by tightening the locking screw
supplied. Use a screwdriver or a coin.
2. The wall unit can also be mounted on a wall.
Always ensure that the wall can bear the weight of
UniRapido.