V-TAC VT-524-S Instruction Manual

Emergency lights
Hide thumbs Also See for VT-524-S:

Advertisement

TECHNICAL DATA

MODEL
SKU
WATTS
LAMP TYPE
LUMENS
INPUT POWER
BODY TYPE
OPERATION TIME
CHARGING CURRENT
DISCHARGING CURRENT
BATTERY TYPE
RECHARGE TIME
INDICATOR
LEGENDS
VIEWING DISTANCE
DIMENSION
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully
before starting the installing and keep this manual handy for future reference. If you have any another query, please contact
our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect
installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect
removal and installation of the product. This product is warranted for manufacturing defects only. This product is warranted for
manufacturing defects only.
Our products are designed to comply with the recommendations of BS EN 60598-1:2008 code of practice for emergency
lighting and should be installed by a competent person in accordance with the relevant regulations. Before installation of any
type of emergency lighting always seek the advice of the local fire prevention o cer (or equivalent authority).
INSTRUCTION MANUAL
EMERGENCY LIGHTS
VT-524-S
838
4W
30 SMD LEDs
190LM
AC:220-240V, 50/60Hz
100% PC
>3 HOURS (MAINTAINED)
90-150mA
180-250mA
Ni-Cd 4.8V 900mAh
12 HOURS
GREEN LIGHT INDICATOR
3 WAY LEGENDS AVAILABLE
22 METERS
352x118x80mm
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in
multiple languages.
WEEE Number: 80133970

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VT-524-S and is the answer not in the manual?

Questions and answers

Summary of Contents for V-TAC VT-524-S

  • Page 1 INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product.
  • Page 2 WARNING: 1. Please make sure to turn o the power before starting the installation. 2. Installation must be performed by a qualified electrician 3. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
  • Page 3 fitting. In case of any query/issue with the product, please reach out to us at: support@v-tac.eu For More products range, inquiry please contact our distributor or nearest dealers.

Table of Contents