Table of Contents
Advertisement
49 Network configuration
Pairing – Establishing a Powerline connection
In order to use a new devolo Magic 1 WiFi mini in
your devolo Magic network, first you have to
connect it to your existing devolo Magic adapters
devices as a network. This is accomplished by using
a shared password. This can be assigned in diffe-
rent ways:
b
Using
devolo Home Network App (see Chapter 3.4
Installation of devolo software),
b
Only using the Powerline button (see Chapter
2.3 Pairing – Establishing a Powerline
connection
devolo Magic 1 WiFi mini)
b
Using the web interface, in the Powerline
menu; as described below:
Pairing – Using physical button and on-screen
button
1
First, press the Powerline button on a
devolo Magic adapter in your existing network.
2
Then, click Start pairing to start the pairing
operation. This may take some time.
As soon as the new devolo Magic adapter is inte-
grated into your existing network, it appears in a
devolo Magic 1 WiFi mini
devolo Cockpit
or
and
3.3
Connecting
list of available and established connections (see
Chapter 4.5 Powerline).
Pairing – Using custom password
You can also assign your network a custom
Powerline password you pick yourself. Enter this
password for each devolo Magic adapter in the
Network password field and confirm your settings
the
by clicking the Disk icon.
Note that the custom password is not assigned
to the whole Powerline network automatically.
Instead, you must assign it separately to each of
your devolo Magic adapters.
the
Unpairing – Removing an adapter from a net-
work
1
To remove a devolo Magic adapter from your
devolo Magic network, click Leave Powerline
network.
2
Wait until the LED flashes red and then dis-
connect the devolo Magic adapter from the
mains supply.
Advertisement
Table of Contents
