Dishes", Page; Drying Function", Page - Siemens CM756G1 1 Series User Manual And Installation Instructions

11.2 Setting options with the microwave
You can use the microwave on its own or in combina-
tion with a different operating mode.
Microwave-only operation
The electromagnetic waves of the microwave alone
generate energy and this is converted into heat in food,
for example.
To prevent condensation, when the microwave output
is 600 watts and "Boost", the appliance automatically
switches on a heating element. The cooking compart-
ment and the accessories become hot. The cooking
result is not affected by this.
You can switch off this automatic drying function in the
basic settings.
→ "Basic settings", Page 20
WARNING ‒ Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an addi-
tional heating element to heat the cooking compart-
ment.
Never touch the inside surfaces of the cooking com-
▶
partment or the heating elements while they are hot.
Keep children at a safe distance.
▶
Added microwave
Adding the microwave to an operating mode reduces
the cooking time.
You can combine the microwave with the following
functions:
¡ Types of heating → Page 13
– 4D hot air
– Top/bottom heating
– Circulated air grilling
– Full-surface grill
– Centre-area grill
¡ → "Dishes", Page 18
¡ → "Ventilation function 'Crisp Finish'", Page 18
Possible microwave outputs combined with an
operating mode include:
¡ 90 watts
¡ 180 watts
¡ 360 watts
11.3 Setting the microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 11
¡ → "Cookware and accessories with microwave",
Page 16
Press "Microwave".
1.
Or select the microwave directly using the
‒
ton.
Press the required microwave output setting.
2.
Press "Cooking time".
3.
A cooking time must always be set to operate the
microwave.
To change the preset cooking time, press the relev-
4.
ant time value, e.g. minute display "min" or second
display "s".
a The selected value is marked in blue.
Set the cooking time using
5.
ment bar. Or enter the cooking time directly via the
number field
If required, use
6. Press "Apply".
Press
7.
a The microwave starts and the cooking time counts
down. The display shows the performance reduction
for the maximum microwave output "Boost".
→ "Microwave output settings", Page 11
a When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
Once the cooking time has elapsed:
8.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
If you have switched off the drying function for the
9.
microwave in the basic settings and condensation
has formed in the cooking compartment, dry the
cooking compartment.
→ "Drying function", Page 27
Note: If you open the appliance door during operation,
the operation stops. If you close the appliance door,
you must continue the operation. If you have changed
the basic setting for this, make sure that the microwave
does not resume operation without food inside.
→ "Basic settings", Page 20
Changing the microwave output setting
You can change the microwave output at any time.
1. Press the microwave output setting.
Change the microwave output setting.
2.
Press "Apply".
3.
Changing the cooking time
You can change the cooking time at any time.
Press the cooking time.
1.
Change the cooking time using
2.
adjustment bar. Or enter the temperature directly via
the number field
Press "Apply".
3.
11.4 Setting added microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 11
¡ → "Cookware and accessories with microwave",
Page 16
Requirement: Observe the information about the re-
spective operating mode.
→ "Setting options with the microwave", Page 17
but-
Press the operating mode that you require.
1.
Implement the settings for the operating mode, e.g.
2.
type of heating and temperature.
Press "Added microwave"
3.
Press the required microwave output setting.
4.
Press "Cooking time" and set the cooking time.
5.
Use
6.
a The appliance starts to heat and the time counts
down.
or
⁠ .
to reset the setting value.
to start the operation.
⁠ .
⁠ .
to start the operation.
Microwave en
, or via the adjust-
to switch the ap-
or , or via the
17