Talent-MG3-MS Trademarks and Permissions TSUN and other TSUNESS trademarks are trademarks of TSUNESS Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. TSUNESS Co., Ltd makes no representations express or implied, concerning this...
Talent-MG3-MS Read This First Dear customer, thank you for choosing TSUN products. We hope you will find our products meet your needs for renewable energy. Meantime, we appreciate your feedback regarding our products. A DTU is a communication device for the TSUN microinverter system. DTU and microinverters are all connected to the same WIFI network.
Users can monitor the power generation of the system by Talent monitoring App. The Talent-MG3-MS/MT DTU will detect the power to the public power grid. If there is an export to the public power grid, DTU will communicate with the microinverter locally and reduce the outpower of microinverters.
Talent-MG3-MS Datasheet Model Talent-MG3-MS AC Input Grid Type Single phase Input AC Voltage 230V Input AC Frequency 50 / 60 Hz Max. Current per phase 100A <1W Power Consumption per phase Communication Wi-Fi Type WIFI (802.11 b/g/n) Wi-Fi Frequency Range 2400MHz-2483.5MHz...
Pre-installation Check Check the Package Although TSUN’s products have surpassed stringent testing and are checked before they leave the factory, it is uncertain that the products may suffer damage during transportation. Please check the package for any obvious signs of damage, and if such evidence is present, do not open the package and contact your dealer as soon as possible.
Page 9
Talent-MG3-MS Step 1. Install the DTU. Fix the DTU onto the rails of AC distribution box. Connect the L and N cable to port 11 and port 14. Then connect CT cable to port 4 and port 5. Step 2. Connect CT Install the CT into the L cable.
Page 10
Talent-MG3-MS Step 3. Connect the Wi-Fi antenna Connect the Wi-Fi antenna cable to the DTU. Put the antenna out of the distribution box to get a good Wi-Fi signal. Step 4. Add the DTU to Talent Home Open Talent Home App.
Page 11
Talent-MG3-MS Step 5. Set the power limit function Click the setting button and enter the meter setting page. Switch on the export limit button . Enter the limit power and choose the microinverter that need to control. Press “Confirm” button. Then the status and relationship will be shown on the device list.
Talent-MG3-MS Maintenance Guide Routine Maintenance Only authorized personnel are allowed to carry out the maintenance operations and are responsible for reporting any anomalies. Always use the personal protective equipment provided by the employer when carrying out maintenance. During normal operation, check that the environmental and logistic conditions are appropriate.
Talent-MG3-MS Recycling and Disposal This device should not be disposed of as residential waste. A DTU that has reached the end of its life is not required to be returned to the dealer. Users must find an approved collection and recycling facility in the area.
Within the warranty period of the DTU, the invoice and date of purchase are required for the service. Besides, the trademark on the product should be visible, otherwise, a warranty is not available. More information can be found in TSUN Warranty Policy. V1.0...
Need help?
Do you have a question about the Talent-MG3-MS and is the answer not in the manual?
Questions and answers