Table of Contents
Advertisement
Figure 58. Remove two screws and then open the hinge
Screw specifications
M2.5 x L5
Step 2.
Disconnect the I/O board cable from the system board. Remove one screw and then remove the I/
O board with cable.
Figure 59. Remove the I/ O board with cable
Screw specifications
M2 x L3.5
Step 3.
Separate the I/O board cable from the I/O board.
Number of screws
2
Number of screws
2
.
Chapter 4
Removing a FRU or CRU
63
Advertisement
Table of Contents
