Lenovo V14 Gen 3 Hardware Maintenance Manual page 47

Figure 18. Remove the memory module shielding
Step 3. Remove the DIMM absorber.
Note: Don't forget to reinstall DIMM absorber back to original location when replacing related
FRUs.
Figure 19. Remove the DIMM absorber
Step 4. Release the two latches on both edges of the socket at the same time. Then remove the memory
module.
Figure 20. Remove the memory module
Go to
https://support.lenovo.com/partslookup
replacement parts:
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
41