Adding Detergent And Care Product; Starting The Programme; Soaking Laundry; Adding Laundry - Bosch WAX32LH9GB User Manual And Installation Instructions

Hide thumbs Also See for WAX32LH9GB:
Table of Contents

Advertisement

Push in the detergent drawer.
4.
13.7 Adding detergent and
care product
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 11 sec-
tions to ensure that you use the
appliance safely.
¡ Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
Requirement: Find out the optimum
dosage for detergent and care
product. → Page 37
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 21
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.8 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press Start/Reload 
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a If you start a programme with act-
ive oxygen, the drum lights up
after the programme starts and the
mist that is created can be seen.
a After the programme has ended,
the display shows: -0-.
.
13.9 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press Start/Re-
.
load 
To resume the programme, after
3.
the desired soaking time, press
Start/Reload 
13.10 Adding laundry
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 11 sec-
tions to ensure that you use the
appliance safely.
¡ If you a start a programme with
active oxygen, you cannot add any
laundry after the programme has
started.
Press Start/Reload 
1.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
Add or remove laundry.
2.
Close the door.
3.
Press Start/Reload 
4.
13.11 Cancelling the pro-
gramme
Once the programme has started,
you can cancel it at any time.
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 11 sections
to ensure that you use the appliance
safely.
Press Start/Reload 
1.
Open the door.
2.
Basic operation en
.
.
.
.
41

Advertisement

Table of Contents
loading

Table of Contents