Stark ST-324W Operating Manual

OPERATING
MANUAL
STARK
Wireless Curtain PIR
ST-324W
"This product is a networking accessory that needs to be used with the
--------c�o•m��-• n _y_'s gateway _______ _
> Product overview
Curtain infrared intrusion detector adopts dual infrared sensor combined
with advanced digital signal processing technology, can detect intruders
passing through the protected area, and has the function of temperature
compensation.Exquisite appearance, flexible installation has the
characteristics of small environmental impact, low false alarm rate, safety
and reliability, suitable for balcony, door, window, corridor and other areas
to prevent.
> Product features
• The whole process temperature compensation, adaptive temperature
changes
• Anti-white light interference
• Anti-electromagnetic interference
• Low power detection, low power report
• Two-stage infrared gain adjustable
Easy to install, beautiful and generous
•
Screw-in mounting bracket supports wall hanging or ceiling mounting
•
> Technical parameters
• Power: DC3V(AA battery *2)
• Standby current: 30uA
• Battery life: 2-3 years (100 alarm triggers/day)
• Wireless frequency: 433.92MHz
• Transmitting current: 20mA
• Wireless range: 300m (open area)
• Operating temperature: -10 ° C-+50 ° C
• Sensor type: Dual element pyro-electric IR sensor
• Installation: Wall hanging or ceiling
• Installation height: Wall hanging: 1.8 meters, Ceiling: 2.5-6 meters
• Detection range: 9 meters
• Detection Angle: horizontal 6 ° , vertical 130 °
11!!11
> Product diagram
Main Board Scattergram
Indicator
The red light flashes each second: detector initializing
Green light quickly flashes: old battery
The red light flashes for one second: the detector be triggered
Green light flashes each 15 seconds: Detector low power
Jumper for working mode
SAVING Mode:
After the infrared alarm is triggered, if it is triggered repeatedly, the
infrared alarm will no longer be triggered to send the alarm signal.Only
after the infrared signal is not detected for 10 seconds continuously, the
infrared can be triggered again to give an alarm.
NORMAL Mode:
After the infrared alarm is triggered, the time for lockdown is fixed for 1 0
seconds, then the infrared alarm can be triggered again after 10 seconds.
Sensitivity selection:
1 P is single pulse mode with high detection sensitivity and is used in
general indoor environment.
2P is a double pulse mode with strong anti-interference capability for
severe environment.
11!!11