Summary of Contents for Stark HY-31
- Page 1 OPERATING MANUAL STARK WlreleH Water Leakage HY-31 "Thlsproductisanetw orklngeccessorythat needstobeusedwith th e -------- -------- company' s gateway...
-
Page 2: Product Introduction
Product Introduction The water leakage detector uses the principle of electrode immersion resistance change to detect water. The detector adopts MCU intelligent detection method, sensor uses rust-proof design with advantage of high accuracy and sensitivity. This product has the advantages of low power consumption, stability, reliability, etc. -
Page 3: Technical Specifications
(ON/OFFJ8u-, S••-18ul��n.,.rnec hos1dsofbedNncllon) [Sell-n,n/Mine]8utton Technical Specifications Operating Voltage: DC 3V (2pcs 1.SV/AAA battery) Working Current: ::s;lOuA Alarm Current: �lOOmA Sound Level: �OdB Wireless Frequency: 433.92MHz Wireless Distance: :5100M (open area) Working Temperature: -20-C~+GO"C Working Humidity: :580% (no congelation) -
Page 4: Usage Instructions
Features • Rust-proof sensor, long services life. • Ultra-micro power consumption design. • Intelligent signal analysis technology. • Sound and flash alarm function. •Turn off leakage detection function. • Automatically detect the loading of old and new battery function. • Battery low power prompt function. Usage Instructions Enrollment Alarm host enters detector enrolled status, short press... - Page 6 When detector alarming, user can press (5elf-test/ Mute]button to enter mute status, at this state red light flashes once every one second, the buzzer stop sounding. Mute status continues 10 minutes, if still detects water alter 10 minutes, the detector will alarm again to warn users.
-
Page 7: Installation Notice
flash. Detector without alarming status, red light flashes once every 605. When battery low power, green light flashes once and buzzer sounds once every 60S to remind users change battery. Installation Notice The detector's water leakage detection height is related to the installation position. -
Page 8: Installation Reference
• Do not install it in the area with rain, oil smoke and steam. • When installing accessories, please avoid installing on objects with lots of metal and wires. Installation Reference Thec1lc1rmwon' t betriggeredif The c1lc1rmwillbetriggered thewaterdo esn' t rec1chthe sensor lfthewc1terrec1chesthesensor... - Page 9 Notes • When detector detects water and still at alarming state after draining away the water, this may be water residue inside or on the surface of the sensor. Dry the water residue with on surface towel to check if detector recovers to normal If still working status.
- Page 10 Wire less Water Leakage Alarm User Manual Vl.1 20221116...
Need help?
Do you have a question about the HY-31 and is the answer not in the manual?
Questions and answers