Fresca FFT3076CH Installation Instructions

Three-hole faucet

Advertisement

INSTRUCTIONS
FFT3076CH
Three-hole faucet

Important

We recommend that this product is installed by a qualified professional contractor.
Please check this product immediately to ensure that it has not been damaged and is complete.
Please flush the water system to ensure that no debris or any other impurities can enter the taps.
Turn off water supply before commencing work.
Please read these instructions carefully and keep for future reference.
Maintainance
We do NOT recommend you use any household cleaners to clean the product. Because these cleaners change substance or formula
too frequently. The product should always be cleaned with soapy water and rinsed with clean water and dried with a soft cloth.

Dimensions

4.8"
3.9"
3.9"
Unit:inches
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FFT3076CH and is the answer not in the manual?

Questions and answers

Summary of Contents for Fresca FFT3076CH

  • Page 1 INSTALLATION INSTRUCTIONS FFT3076CH Three-hole faucet Important We recommend that this product is installed by a qualified professional contractor. ● Please check this product immediately to ensure that it has not been damaged and is complete. ● Please flush the water system to ensure that no debris or any other impurities can enter the taps.
  • Page 2 Installation Faucet Hot switch valve(Red) O-ring Rubber washer Cold switch valve (Blue) Plate washer Fixing washer Round screw Fixing nut Supply Lines Three way connector Fit the rubber washer into the bottom groove of the faucet, place the faucet into the installing hole on the countertop.Place the plate washer and fixing washer under the countertop and revolve the fixing nut.Check that the faucet is correctly positioned,then tighten the round screw .Screw the three way connector(make sure a plate washer inside) onto the bottom thread of the faucet.

Table of Contents