Advertisement
Quick Links
INSTALLATION
INSTRUCTIONS
FFT1044CH
Single hole faucet
Important
We recommend that this product is installed by a qualified professional contractor.
●
Please check this product immediately to ensure that it has not been damaged and is complete.
●
Please flush the water system to ensure that no debris or any other impurities can enter the taps.
●
Turn off water supply before commencing work.
●
Please read these instructions carefully and keep for future reference.
Cleaning
Before use: Unscrew the Aerator and allow the water to run freely for 5 minutes. Then screw the filter back in place.
Periodically: Unscrew the Aerator and remove. Rinse it with running water until any loose debris is cleared. Then replace the Aerator
and tighten.
Aerator
1
Advertisement
Related Manuals for Fresca FFT1044CH
Summary of Contents for Fresca FFT1044CH
- Page 1 INSTALLATION INSTRUCTIONS FFT1044CH Single hole faucet Important We recommend that this product is installed by a qualified professional contractor. ● Please check this product immediately to ensure that it has not been damaged and is complete. ● Please flush the water system to ensure that no debris or any other impurities can enter the taps.
- Page 2 6 1/8″ Dimensions 4 3/4″ Unit:inches 4 7/8″ Installation GRUB SCREW HANDLE CARTRIDGE COVER RETAINING FAUCET CARTRIDGE PEDESTAL FAUCET SUPPLY LINES WASHER To remove the cartridge. First shut off the water supply to the tap. 1: Unscrew the handle from the cap. RUBBER WASHER 2: Loosen the grub screw in cap.
Need help?
Do you have a question about the FFT1044CH and is the answer not in the manual?
Questions and answers