Teledex iPhone A100 User Manual

Included in Your Package
Handset
Line Cord
Phone Base Unit
REQUIREMENTS OF PART 68 - FCC RULES
This equipment complies with Part 68 of the FCC Rules and the
requirements adopted by ACTA. On the bottom of this telephone is
a label that contains, among other information, a product identifier
in the format US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company. The USOC Jack for this equip-
ment is RJ11C.
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by ACTA. A compliant telephone cord
and modular plug are provided with this telephone. It is designed to
be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
The Ringer Equivalence Number (REN) is used to determine the num-
ber of devices that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in re-
sponse to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices
that may be connected to a line, as determined by the total RENs,
contact the local telephone company. For products approved after July
23, 2001, the REN for this product is a part of the product identifier
that has the format US:AAAEQ##TXXXX. The digits represented by ##
are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier
products, the REN is separately shown on the label.
If this telephone causes harm to the telephone network, the tele-
phone company will notify you in advance that temporary discontinu-
ance of service may be required. But if advance notice is not practical,
the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC if
you believe it is necessary.
The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the equip-
ment. If this happens, the telephone company will provide advance
notice in order for you to make the necessary modifications to maintain
uninterrupted service.
If trouble is experienced with this equipment, for repair or warranty
information, please contact Teledex at (800) 794-8353. If the equip-
ment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the
problem is resolved.
There are no user serviceable parts contained in this equipment.
Connection to party line service is subject to state tariffs. Contact the
state public utility commission, public service commission or corpora-
tion commission for information.
For Models A100, A101, A102, A103, A105, A110, A110S, A205, A205S, A210S
Clear Plastic Overlay
Coiled Handset Cord
User Guide
iPhone A Series User Guide
If your home has specially wired alarm equipment connected to the
telephone line, ensure the installation of this product does not
disable your alarm equipment. If you have questions about what
will disable alarm equipment, consult your telephone company or
a qualified installer.
This telephone is hearing aid compatible.
INDUSTRY OF CANADA REQUIREMENTS
NOTICE: This equipment meets the applicable Industry Canada Termi-
nal Equipment Technical Specifications. This is confirmed by the regis-
tration number. The abbreviation, IC, before the registration number
signifies that registration was performed based on a Declaration of
Conformity indicating that Industry Canada technical specifications were
met. It does not imply that Industry Canada approved the equipment."
Before installing this equipment, users should ensure that it is permis-
sible to be connected to the facilities of the local telecommunications
company. The equipment must also be installed using an acceptable
method of connection. The customer should be aware that compli-
ance with the above conditions may not prevent degradation of
service in some situations.
Repairs to certified equipment should be coordinated by a represen-
tative designated by the supplier. Any repairs or alterations made
by a user to this equipment, or equipment malfunctions, may give
the telephone communications company cause to request the user to
disconnect the equipment.
Users should ensure for their own protection, that the electrical
ground connections of the power utility, telephone lines and
internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections them-
selves, but should contact the appropriate electric inspection author-
ity, or electrician, as appropriate.
"NOTICE: The Ringer Equivalence Number (REN) assigned to each ter-
minal device provides an indication of the maximum number of termi-
nals allowed to be connected to a telephone interface. The termina-
tion on an interface may consist of any combination of devices subject
only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed 5."
REN: Z
For warranty and service in Canada, please contact:
Williams Telecommunications
5610 Kennedy Road
Mississauga, Ontario, L4Z2A9
Canada
Phone: 905-712-4242
Fax: 905-712-1754
1