en Cleaning and servicing
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
Take out all of the food and store it
3.
in a cool place.
Place ice packs (if available) onto
the food.
If there is a layer of hoarfrost, allow
4.
this to defrost.
Remove all fittings and accessor-
5.
ies from the appliance.
→ Page 20
Remove the partition. → Page 22
6.
Remove the cover. → Page 22
7.
Remove the telescopic rails.
8.
→ Page 22
14.2 Cleaning the appliance
WARNING
Risk of electric shock!
An ingress of moisture can cause an
electric shock.
Do not use steam- or high-pres-
▶
sure cleaners to clean the appli-
ance.
Liquid in the lighting or in the con-
trols can be dangerous.
The rinsing water must not drip
▶
into the lighting or controls.
ATTENTION!
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
Do not use hard scouring pads or
▶
cleaning sponges.
Do not use harsh or abrasive de-
▶
tergents.
Do not use cleaning products with
▶
a high alcohol content.
If you clean fittings and accessories
in the dishwasher, this may cause
them to become deformed or discol-
our.
Never clean fittings and accessory
▶
in the dishwasher.
20
Prepare the appliance for cleaning.
1.
→ Page 19
Clean the appliance, the fittings,
2.
the accessories, the components
and the door seals with a dish
cloth, lukewarm water and a little
pH-neutral washing-up liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings and install the ap-
4.
pliance components.
Electrically connect the appliance.
5.
→ Page 11
Switch on the appliance.
6.
→ Page 15
Putting the food into the appliance.
7.
14.3 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
Pull out and remove the shelf.
▶