Cookware Test - Siemens EX975KXV1E/01 Instructions For Use Manual

a After 30 seconds, a signal tone sounds and the
control panel is unlocked.
Individual safety switch-off
19 Individual safety switch-off
The safety function is switched on if one cooking zone
is in operation for an extended period and you do not
change any settings. A message appears on the dis-
play and the cooking zone stops heating.
Basic settings
20 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
20.1 Overview of the basic settings
Setting Description and options
Language Change the display language for the
appliance.
Home Connect You can use this function to connect
the appliance to your home network
and a mobile device.
cookConnect You can use this function to control
System certain functions of the extractor
hood via the hob.
Signal tones You can use this function to select
warning tones that the appliance is
to output.
Duration of the You can use this function to change
warning signal the duration of the warning signal.
Button tones You can use this function to select
whether the appliance emits tones
when you touch the buttons on the
touch display.
Display bright- Change the brightness of the display.
ness
flexInduction You can use this function to set the
switch-on mode for the function after
the hob has been switched on: Two
independent cooking zones or one
single zone.
powerMove You can use this function to change
Plus the preset power levels of the three
cooking areas of the FlexZone.
Childproof You can use this function to automat-
lock ically lock the hob to prevent chil-
dren from using the appliance
without supervision.
quickStop Allows the cooking zone to be
function switched off quickly and directly via
the main display.
Brand logo You can use this function to set
whether the brand logo is to be dis-
played when you switch on the hob.
The function is not available in this model.
1
18.2 Switching off Wipe protection
To cancel the function early, follow the instructions on
the display.
To switch off the display and reset the cooking zone,
touch any button.
Setting Description and options
reStart You can use this function to set how
long the appliance saves the most
recently used settings when you
switch off the appliance.
Power limita- This enables you to limit the total
tion power of the hob, if required, due to
the circumstances of your electrical
installation. The available settings de-
pend on the maximum power of the
hob. You can find precise informa-
tion on the rating plate. If the function
is switched on and the hob has
reached the set power limit,
played and you cannot select a
higher power level.
Energy con- Shows the total energy consumption
sumption dis- in kWh between switching the cook-
play ing zone on and off.
The accuracy of the display depends
on various factors such as the
voltage quality of the power supply.
Cooking Add a new wireless cooking sensor.
1
sensor
Setting the You can enter your height above sea
1
boiling point level to improve the cooking sensor's
accuracy.

Cookware test

You can use this function to test the
quality of the cookware.
Appliance in- You can use this function to call up
formation information about the appliance.
Factory set- Reset all settings to the factory set-
tings tings.
The function is not available in this model.
1
20.2 Calling up basic settings
Requirement: All cooking zones must be switched off.
Open the docking menu.
1.
Touch ⁠ .
2.
Drag your finger to scroll through the available set-
3.
tings.
To call up the submenu and select the required op-
4.
tion, touch a setting.
To return to the previous menu, touch
submenu.
Individual safety switch-off en
is dis-
⁠ within a
17