Related Manuals for Tech 21 Trademark 60
Summary of Contents for Tech 21 Trademark 60
-
Page 2: Important Safety Instructions
2. Attach the AC cord to the amp and plug into a wall socket. 3. Be sure the Level controls on the Trademark 60 are down, then turn on the amp. 4. Use the quick start sample settings provided on the amp. If missing, see the first ®... -
Page 3: Top Panel
Emulation technology enables you to go straight into the mixer of a recorder or PA system via the XLR Direct Output. With the Trademark 60, you get a truckload of big amp sounds in three affordable, cost effective formats: 1x12, 2x12 and 4x10. -
Page 4: Rear Panel
Specifically voiced for guitar, these the amp relative to your environment. The Trademark 60 is designed for optimal sound quality with Low and High at 12 o’clock. If your taste differs or if you are in a less than optimal environment, you can compensate accordingly. - Page 5 The Effect Loop allows you to connect both rack and pedal effects between the pre- amp and power amp section of the Trademark 60. And with the Footswitch, you can remotely activate them. You can then keep the effect(s) either on top of the amp for easy access, or stashed neatly in the back of the amp.
- Page 10 Celestion® 12” speakers, available with straight or slant front. Replacement parts are available, i.e., knobs, grill panel, speaker, logo plate, handle, footswitch, etc. For more information, contact your authorized dealer or Tech 21. ® Registered trademarks. Names of sample settings are intended for descriptive purposes only and should not be construed as an endorsement or affiliation with the companies, products, song titles or artists named.
Need help?
Do you have a question about the Trademark 60 and is the answer not in the manual?
Questions and answers