ENACFIRE SoundBar - Bluetooth Speaker Manual

Packaging List

Control

Track Backward
Press once to play previous song

Volume Down
Press to decrease volume

Play/Pause
Press to Play/Pause Music

Track Forward
Press once to play next song

Volume Up
Press to increase volume
Note: The function of switching songs can be vary from different music players

Light Indicators and Jacks

Rubber Flap
Note: The rubber flap needs to be closed to avoid dust and liquid

Charging

Charging Light Status when charging:

• Battery below 15% Red Light flashes 3 times rapidly
• Battery is charging Red Light flashing
• Fully charged

Charging Time: 6 hours to fully charged Adapter Suggested: 5VI.0A

Battery Features

Power Saving Feature

• ENACFIRE SoundBar will automatically turn off if it's disconnected or no playing any audio for 15 minutes
• This feature will disable if it's charging or connecting to other power sources

Low Power Mode
ENACFIRE SoundBar will decrease volume if the battery is below 15% in order to preserve the remaining battery

Power On and Off

Power On
Press and hold the power button for 1 second with Bluetooth light on
Bluetooth Light Flashing: Pairing mode
Solid Blue Light: Connected

Power Off
Press and hold the power button for 2 seconds with Bluetooth light off

Pairing & Connecting

1. Turn on ENACFIRE SoundBar
2. ENACFIRE SoundBar will automatically enter into pairing mode With Bluetooth light flashing
3. Turn on device's Bluetooth, select 'ENACFIRE SoundBar' from the Bluetooth list
   

Note: Please make sure ENACFIRE SoundBar is fully charged and within the effective connection range before connecting

Connect by 3.5mm AUX Audio Cable

When connecting the ENACFIRE Soundgar by using the AUX Cable, the Bluetooth function will be disabled
Note: Please make sure ENACFIRE SoundBar is fully charged and within the effective connection range before connecting

Water Resistant

Light Water Spray or Splash
Note: the rubber flap needs to be closed at all time to avoid any contamination and be water resistant

Incoming Call

The ENACFIRE SoundBar features functions for calling through smart phones over Bluetooth

To Answer an Incoming Call / End a Call Conservation
Press Bluetooth Button Once

To Reject an Incoming Call
Press and Hold Bluetooth Button for 3 seconds
Note: please keep the Mic as close as possible to achieve better call quality

Q&A

Question 1: Unable to turn on the ENACFIRE SoundBar?
Answer: Please make sure the ENACFIRE SoundBar is fully charged by using the suggested 5V 1.0A adapter. You can also try to use another USB cable to charge the ENACFIRE SoundBar just in case the previous cable is defective

Question 2: Unable to pair or connect to devices?
Answer: Please follow the below steps to reset the ENACFIRE SoundBar

1. Forget all device names in your device's Bluetooth list
2. Restart the ENACFIRE SoundBar and your devices
3. Reconnect

Question 3: No audio when playing the music
Answer: Please make sure the ENACFIRE Sound Bar is connected to the correct device, it will automatically connect to the last connected device once it's turn on. Please also try to use different Apps to play the audio as there might be a glitch happened to the App

Question 4: There is no response when connect the ENACFIRE SoundBarto device by using the 3.5 AUX cable
Answer: Please make sure the 3.5mm audio is fully inserted to the AUX input, you can also try to use another AUX cable just in case the one you used was defective

How to contact ENACFIRE Customer Service Team.
If you have any issues, please always feel free to contact us through below methods:
UK: moongu@enacfireglobal.com
Germany: desupport@163.com
Spain: esenacfire@163.com

SCAN OR CODE FOR
Quick Guide
More product Information
Extended Warranty to 2 Years
http://www.enacfire.com

enacfire.com

Warranty Extension