ENACFIRE SoundTank - Bluetooth Speaker Manual

Packaging List

Control

Play/Pause
Press to Play/Pause Music

Volume Down / Previous Song
Press once to decrease volume Press 2 seconds switch to previous song

Volume Up / Next Song
Press to increase volume Press 2 seconds switch to next song,

Bass + Mode
Press once to activate [orange light on]

Note: Bass effect can be enhanced when the Bass + mode activate [Bass effect can also be largely influenced by the audio quality]. Above control functions can be varied based on different media players.

Light Indicators and Jacks

Note: The Rubber Flap needs to be closed to avoid dust and liquid

Light Status when Charging

Charging: Charging Light Flashing
Fully Charged: Solid Red
Charging Time: 6 hours to fully charged
Adapter Suggested: 5V~1.0A

Note: When the battery is below 20%, low power mode will be activated with charging light flash rapidly.
Volume will also be decreased in order to preserve the remaining battery.

Power On and Off

Power On
Press and hold the power button for 1 second with Bluetooth light on
Bluetooth Light Flashing: Pairing
Solid Blue Light: Connected

Power Off
Press and hold the power button for 2 seconds with Bluetooth light off

Note: Under TWS Stereo Mode, when one speaker is turned off, both speakers will turn off automatically.

Pairing

1. Turn on ENACFIRE Soundtank
   
2. Select 'ENACFIRE Soundtank' from Bluetooth list
   

Note:
Please make sure ENACFIRE Soundtank is fully charged and within the effective connection range before connecting

Connect by AUX Audio Cable

When connecting the Soundtank by the AUX Cable, below functions will be disabled:

1. The Bluetooth function will be disabled
2. The track backward and forward function will be disabled
3. The play/pause function will be replaced by unmute/mute function

Note: The volume control and Bass + Mode is Still available

Water-Resistant

Light Water Spray or Splash

Note: The rubber flap needs to be closed at all time to avoid any contamination and be water-resistant
The waterproof effect may be reduced if the speaker is damaged or broken as a result of daily use

Incoming Call

The Soundtank features function for receiving call through smart phones over Bluetooth

Answer Call / End Call
Press Bluetooth Button Once

Reject Cali
Press and Hold Bluetooth Button for 2 seconds

Note: Please keep the Mic as close as possible to achieve better call quality

Q&A

Question 1: Unable to turn on the ENACFIRE Soundtank?
Answer: Please make sure the ENACFIRE Soundtank is fully charged by using the suggested 5V 1.0A adapter. You can also try to use another USB cable to charge the Soundtank just in case the previous cable is defective.

Question 2: Unable to pair or connect to devices?
Answer: Please follow the below steps to reset the ENACFIRE Soundtank

1. Turn on 'ENACFIRE Soundtank'
2. Connect 'ENACFIRE Soundtank' to a phone by AUX cable and plug out the AUX cable
3. Double press the Bluetooth button within 10 seconds
4. Turn off 'ENACFIRE Soundtank'
5. Delete 'ENACFIRE Soundtank' from Bluetooth list
6. Reconnect the "ENACFIRE Soundtank'

Question 3: No audio when playing the music
Answer: Please make sure the ENACFIRE Soundtank is connected to the correct device. it will automatically connect to the last connected device once it's turn on. Please also try to use different Apps to play the audio as there might be a glitch happened to the App.

Question 4: There is no response when connect the ENACFIRE Soundtank to device by using the 3.5 AUX cable
Answer: Please make sure the 3.5mm audio is fully inserted to the AUX input, you can also try to use another AUX cable just in case the one you used was defective.

How to contact ENACFIRE Customer Service Team

If you have any issues, please always feel free to contact us through below methods:

US/CA: support@enacfireglobal.com
UK: moongu@enacfireglobal.com

More product Information: http://www.enacfire.com

Documents / Resources

References

• ENACFIRE Wireless Earbuds | Expect the Unexpected

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download ENACFIRE SoundTank - Bluetooth Speaker Manual